4 Alignment and Adjustments
4-3 Color Adjustments
CAUTION:Check below condition before color adjustment
Video signal : Analog 0.7
Sync : TTL level (H, V seperate signal)
* Select ÒColorÓ in Softjig menu for color adjustment.
4-3-1 Color Coordinates (Temperature)
Color temperature is a measurement of the radiant energy transmitted by a color. For computer monitors, the color temperature refers to the radiant energy transmitted by white. Color coordinates are the X and Y coordinates on the chromaticity diagram of wavelengths for the visible spectrum.
CONDITIONS
Scanning frequency: | 68 kHz/85 Hz (17Ó) |
| 54 kHz/85 Hz (15Ó) |
Display image: | White box pattern |
Brightness: | |
| Pattern Display |
Contrast: | Maximum |
| |
| FRONT BEZEL OPENING |
BACK RASTER | |
| |
| WHITE WINDOW |
Measurement instrument: Color analyzer
Scanning frequency: 68 kHz/85 Hz (17Ó) 54 kHz/85 Hz (15Ó)
Display image: White flat field at center of display area
Luminance: Maximum
PROCEDURE
Use the directions in sections
9300K to x = 0.283 ± 0.02, | y = 0.298 ± 0.02 |
6500K to x = 0.313 ± 0.02, | y = 0.329 ± 0.02 |
4-3-2 Color Adjustments for 9300K
CONDITIONS |
|
Scanning frequency: | 68 kHz/85 Hz (17Ó) |
| 54 kHz/85 Hz (15Ó) |
Display image: | Back raster pattern |
Brightness: | Maximum |
Contrast: | Maximum |
1.Select Ò@1: CHANNEL 1Ó in right menu to control the color for 9300K.
2.Adjust the luminance of the back raster to between 0.5 to 0.7
3.Use control bar after selecting ÒBLUE CUTOFFÓ in left menu to set the ÒyÓ coordinate to 0.298 ± 0.02.
4.Use control bar after selecting ÒRED CUTOFFÓ in left menu to 0.283 ± 0.02.
*If color values would not be matched desirable values, repeat sequence 3 and 4 after readjusting ÒGREEN CUTOFFÓ control a little different.
Figure 4-8. White Box Pattern
1.Use control bar after selecting ÒRED GAINÓ, ÒGREEN GAINÓ and ÒBLUE GAINÓ to adjust the luminance to 45 ft-L (15Ó) and 46 ft-L (17Ó) with the color coordinates ranged for 9300K to x = 0.283 ± 0.02, y = 0.298 ± 0.02.
exception) 17Ó SDD CRT type-named (*/S-2) : 42ft-L.
|
|
|
| |||||||
CONDITIONS |
|
|
|
| ||||||
Scanning frequency: | 68 kHz/85 Hz (17Ó) | |||||||||
|
|
|
|
|
|
| 54 kHz/85 Hz (15Ó) | |||
Display image: | Full white pattern | |||||||||
Brightness: | Maximum | |||||||||
Contrast: | Maximum | |||||||||
|
|
|
|
|
|
|
|
|
| FRONT BEZEL OPENING |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
| BACK RASTER |
|
|
|
|
|
|
|
|
|
| WHITE WINDOW |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Figure 4-9. Full White Pattern
1.Check the ABL. If it is not within the specifications, use the ABL controls to adjust it. (15Ó: 33 ± 1 ft-L, 17Ó: 36 ± 1 ft-L )
2.Select Ò@4: COLOR SAVEÓ to save the data.
3.Select Ò@6: ALL COLOR SAVEÓ to save the CH2.
DP15H*/DP17L* |