Samsung G19P manual Modes, Control Panel → Display →

Page 35

I cannot see the On Screen Display.

The screen shows strange colors or just black and white.

Connected using the DVI cable?

Have you locked the On Screen Display (OSD) Menu to prevent changes?

Is the screen displaying only one color as if looking at the screen through a cellophane paper?

Have the screen colors become strange after running a program or due to a crash between applications?

can handle properly.

If the display exceeds SXGA or 75 Hz, a "Not Optimum

Mode","Recommended Mode 1280 x 1024 60 Hz" message is displayed. If the display exceeds 85 Hz, the display will work properly but the "Not Optimum

Mode","Recommended Mode 1280 x 1024 60 Hz" message appears for one minute and then disappears.

Please change to the recommended mode during this one-minute period.

(The message is displayed again if the system is rebooted.)

You may get a blank screen if you boot the system before you connect the DVI cable, or disconnect and then reconnect the DVI cable while the system is running as certain types of graphic cards do not send out video signals.

Connect the DVI cable and then reboot the system.

Unlock the OSD by pressing the MENU/ button for at least 5 seconds.

Check the signal cable connection.Make sure the video card is fully inserted in it's slot.

Reboot the computer.

 

Has the video card been set

Set the video card by referring to

 

properly?

the video card manual.

The screen suddenly has

Have you changed the video card

Adjust screen image position

become unbalanced.

or the driver?

and size using the OSD.

 

Have you adjusted the resolution

Adjust the resolution and

 

or frequency to the monitor?

frequency at the video card.

 

 

(Refer to the Preset Timing

 

 

Modes).

The screen can be unbalanced due to the cycle of the video card signals. Readjust Position by referring to the OSD.

The screen is out of focus or OSD cannot be adjusted.

Have you adjusted the resolution or frequency on the monitor?

Adjust the resolution and frequency of the video card. (Refer to the Preset Timing Modes).

LED is blinking but no images on the screen.

There are only 16 colors shown on the screen. The screen colors have

Is the frequency properly adjusted when checking the Display Timing on the menu?

Have the Windows colors been set properly?

Adjust the frequency properly by referring to the video card manual and the Preset Timing Modes.

(The maximum frequency per resolution may differ from product to product.)

Windows ME/2000/XP:

Set the colors properly at the

Control Panel → Display →

Page 34 Page 36
Image 35
Page 34 Page 36
Contents SyncMaster G19P Notational PowerUse only a properly grounded plug and receptacle Insert the power plug firmly so that it does not come looseDo not disconnect the power cord while using the monitor Do not use a damaged or loose plugDo not place the product on the floor InstallationDo not drop the monitor when moving it Keep any heating devices away from the power cableKeep the plastic packaging bag out of childrens reach CleanPut down the monitor carefully Do not place the monitor face downDo not remove the cover or back OthersNever insert anything metallic into the monitor openings Do not cover the vents on the monitor cabinetPage Product unplugged Good Postures When Using the MonitorUnpacking Monitor Driver Warranty Card Users Guide Quick Setup GuideCable Sub Cable Power Cord Sold separately DVI Cable FrontRear Kensington Lock For using a locking device, contact the place of purchaseDVI Connecting the MonitorRGB Attaching a Base Using the StandMonitor Assembly Folding the BaseClick Windows Installing the Monitor Driver AutomaticMicrosoft Windows XP Operating System Installing the Monitor Driver ManualPage Page Microsoft Windows NT Operating System How to installMicrosoft Windows Millennium Operating System Natural Color Installing the Natural Color SoftwareNatural Color Linux Operating SystemPage Auto Description OSD Lock & UnlockMenu Menu Description Deactivate the OSD adjustment lock functionBrightness MagicBrightPicture SourceDescriptionPlay/Stop ColorBrightness Contrast MagicColor Color Tone Color Control Gamma ImageCoarse Fine Sharpness Position OSDLanguage Position Transparency Display Time SetupInformation Auto Source Image Reset Color ResetInformation Check List Symptom Check ListSolutions Control Panel → Display → ModesAnswer Self-Test Feature CheckSettings QuestionUseful Tips Self-Test Feature CheckGeneral PowerSaver Horizontal Frequency Preset Timing ModesPixel Clock Sync Polarity Display Mode Frequency MHz KHz HorizontalEurope Contact Samsung WorldwideNorth America Latin AmericaAsia Pacific CISMiddle East & Africa TermsFor Better Display México AuthorityPage Suggestions for specific applications WarrantyWhat is Image retention ? Power Off, Screen Saver, or Power Save Mode
Top Page Image Contents