Samsung SMT-1721 manual No Signal Display, OSD Menu Selection, Input Menu,  PIP on VGA mode only

USER'S MANUAL

OSD Menu Configurations

No Signal Display

When there is no connection at the VGA and Video input, the On Screen Display will show this message.

No Signal

<Video mode>

Check signal cable.

VGA

<VGA mode>

OSD Menu Selection

1.Press the MENU button to see the main menu.

2.Press / and ENTER button to select the main menu.

3.Press / and ENTER (or  ) button to select the sub menu.

4.Press / and ENTER (or  ) button to select setting. (Or press / button to select setting)

5.Press the MENU or  button repeatedly to exit.

NOTE1: Press the MENU or  button to return to the previous screen.

NOTE2: The OSD display will be disapear after 2 minutes if there is no button input.

Inputs can be set to Video A, Video B, S-Video, VGA mode.

1.Press the MENU and ENTER button.

2.Press the ENTER or  button and then / button to select input menu.

3.Press the ENTER or button to save the setting and exit.

PIP ON (VGA mode only)

			PIP
	PIP	: Off	
	Source	: S-video	
	Size	:	
	Position	:	
Move		Enter	Return

If you didn't select VGA input, this menu is not available.

1.Press the MENU and ENTER button.

2.Press the / and ENTER button to select the PIP menu.

3.Press the ENTER or  button to see the sub menu.

4.Press the / and ENTER button to select On.

5.Press the MENU or  button repeatedly to exit.

PIP Source select (VGA mode only)

PIP

Video A

Video B

S-Video

Move Enter Return

English

A. Input Menu

			Input
	Source List :	Video A	
	PIP		
	Edit Name		
Move		Enter	Exit

If you didn't select PIP On, this menu is not available.

1.Press the MENU and ENTER button.

2.Press the / and ENTER button to select the PIP menu.

3.Press the / and ENTER button to select the Source.

4.Press the / and ENTER button to select desired PIP source.

5.Press the MENU or  button repeatedly to exit.

--

1-AB68-00651A-03eng_0607.indd 9

2007-06-07 오후 7:13:28