Connecting Your Monitor
3. Connecting DVD / DTV Devices
Connect to the DVD / DTV Devices input if the device has a DVD / DTV connector. You can watch DVD / DTV simply by hooking up the DVD / DTV with the monitor as long as the power is on.
1.Connect a video cable between the component(Y, Pb, Pr) jacks on the Monitor and the Y, Pb, Pr jacks on the DVD / DTV Devices.
2.Connect the Audio (R) and Audio (L) outputs on the DVD / DTV Devices to the Audio (R) and Audio
(L) inputs on the monitor using audio cables.
3.Select COMP using the Video button from the user control buttons.
4.Connecting to a Macintosh
1.Connect the power cord to the DC adapter and then connect the adapter jack to the DC POWER port on the monitor. (Voltage is automatically adjusted by the power adaptor.)
2.Connect the signal cable to the
3.For older model Macintoshes, you need to adjust the resolution control DIP switch on the Macintosh adapter (optional) referring to the switch configuration table shown on its rear.
4.Turn on the monitor and Macintosh.