Samsung 173MW manual Problems related to Audio, Problems related to Remote Control

Page 46

Problems and Solutions

3. Problems related to Audio

Problems related to audio signals and their solutions are listed below.

Problems

vibrates.

Ghost images are shown in the picture.

The image is too light or too dark

Screen color is inconsistent.

Color image is distorted with dark shadows.

White color is poor.

Power Indicator blinks green.

Screen is blank and power indicator light is steady green or blinks every 0.5 or 1 seconds

Solutions

video card falls in the range supported by the monitor. If not, reset them referring to the current Information under the monitor menu and Preset Timing Modes.

zAdjust the Brightness and Contrast. (Refer to the Brightness, Contrast)

zAdjust color using Custom Color under OSD Color Adjustment menu.

zThe monitor is currently saving the changes made in settings to the OSD memory.

zThe monitor is using its power management system.

zMove the computer's mouse or press a key on the keyboard

3. Problems related to Audio

Problems related to audio signals and their solutions are listed below.

Problems

 

Solutions

 

 

 

No sound

 

z Ensure that the audio cable is firmly connected to both the

 

 

audio-in port on your monitor and the audio-out port on your

 

 

sound card. (Refer to the Connecting Your Monitor)

zCheck the volume level. (Refer to the Volume)

Sound level is too low.

zCheck the volume level. (Refer to the Volume)

zIf the volume is still too low after turning the control to its maximum, check the volume control on the computer sound card or software program.

Sound is too high pitched or too low pitched

zAdjust the Treble and Bass to appropriate level.

4. Problems related to Remote Control

Problems related to the remote control and their solutions are listed.

Problems

The remote control buttons do not respond.

Items to check

zCheck the battery polarities (+/-).

zCheck if the batteries have been exhausted.

zCheck if the power is on.

zCheck if the power cord is securely connected.

zCheck if a special fluorescent or neon lamp is on in the vicinity.

Image 46
Contents SyncMaster 173MW Notational Do not use a damaged or loose plug PowerUse only a properly grounded plug and receptacle Place the monitor on a flat and stable surface InstallationDo not drop the monitor when moving it Set down the monitor carefullyKnocked-over antenna may cause injury or an electric shock Cleaning Do not spray water or detergent directly on the monitorOther Do not cover the vents on the monitor cabinetDo not use or store inflammable substances near the monitor Be careful when adjusting the stand angleDo not place any heavy objects on the monitor Never insert anything metallic into the monitor openingsKeep power adaptor away from any other heat source Keep all power adaptors apartRemove and discard vinyl bag from power adaptor before use Unpacking UnpackingFront PIP Picture in Picture?DVD/DTV Connection Terminal Power Connection Terminal 14V DCRear PC Connection TerminalButton Names Remote ControlReplacing Batteries Connecting Your Monitor Connecting to a ComputerConnecting AV Devices When using an outdoor antenna Connecting TVWhen using an interior antenna terminal To connect the RF cable to the antenna input terminalConnecting DVD / DTV Devices Connecting to a MacintoshConnecting Headphone Windows ME Installing the Monitor DriverClick Windows ME Driver Windows XP/2000 Click Windows XP/2000 DriverMicrosoft Windows XP Operating System Installing the Monitor Driver Installing the Monitor Driver Microsoft Windows 2000 Operating System How to install Click Start , Setting , Control PanelMicrosoft Windows Millennium Operating System Microsoft Windows NT 4.0 Operating System Linux Operating SystemInstalling a Vesa base User Controls Control ButtonsInfo Exit Remote Control ButtonsSize Swap Power ChannelPRE-CH TV / AV / S-Video / DTV Mode P.MODE Picture ModePC / DVI Mode M/B MagicBright InfoAuto Use only PC mode On-Screen DisplayWhen connected to Component Ex When there is no external device connectedWhen connected to S-Video SourceVolume Channel PIPOSD OSD FunctionsInput Control DVIEdit Name Description Position Popup TimerOSD PIP Translucency Level Opaque / High / Medium / LowPicture Control Coarse Repeat it after adjusting the frequency clock speedAdjusts the screen location horizontally and vertically FineTV / AV / S-Video / Component Mode CustomizableMedium DNIeOff HighBBE MTSChannel Control STD HRC IRCSetup Control More InformationSelf-Test Feature Check Check before calling for serviceNot Optimum Mode Symptoms and Recommended Actions MaintenanceDisplay Adapter Driver Problems related to Installation Problems and SolutionsProblems related to Screen Problems related to Audio Problems related to Remote ControlQuestion Answer General Specifications Input Signal, TerminatedEnvironmental considerations PowerSaver EPA/ENERGYHorizontal Frequency Preset Timing ModesNtsc Broadcasting Systems Vertical FrequencyService Center Chile Sonda S.A MexicoBtsc TermsEiaj Catv VHF/UHFUser Information RegulatoryFCC Information User Instructions IC Compliance NoticePCT Notice Why do we have environmentally labelled computers?European Notice Europe only VcciEnvironmental requirements Flame retardants What does labelling involve?TCO Development CadmiumEmissions ErgonomicsEnergy EcologyTCO03 Recycling Information TCO03 applied model only ElkretsenNatural Color How to install the Natural Color softwareHow to delete the Natural Color software program Natural Color Software ProgramFor Better Display For Better DisplayAuthority