Samsung 151X Dimensions WxDxH/ Weight, Vesa Mounting Interface, Environmental considerations

Page 49

Dimensions (WxDxH)/ Weight

326.3 x 49.5 x 267.1 mm / 12.8 x 1.9 x 10.5 inch (Without Stand)

326.3 x 158.7 x 314.3 mm / 12,8 x 6,2 x 12,4 inch (with Basic Stand) / 2.5kg

VESA Mounting Interface

75mm x 75mm (for use with Specialty(Arm) Mounting hardware.)

Environmental considerations

Operating

Temperature: 50°F ~ 104°F(10°C ~ 40°C)

 

Humidity: 10% ~ 80%, non-condensing

Storage

Temperature: -4°F ~113°F (-20°C ~ 45°C)

 

Humidity: 5% ~ 95%, non-condensing

Plug and Play Capability

This monitor can be installed on any Plug & Play compatible system. Interaction of the monitor and computer systems will provide the best operating conditions and monitor settings. In most cases, monitor installation will proceed automatically, unless the user wishes to select alternate settings.

Note: Design and specifications are subject to change without prior notice.

PowerSaver

This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor into a low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPMS compliant video card installed in your computer. Use a software utility installed on your computer to set up this feature.

State

Normal Operation

Power saving mode

Power Switch off

EPA/ENERGY 2000

 

 

 

Power Indicator

Green

Green, Blinking

Black

Power Consumption

Less than 30W

Less than 2W

Less than 1W

This monitor is EPA ENERGY STAR® compliant and ENERGY2000 compliant when used with a computer equipped with VESA DPMS functionality.

As an ENERGY STAR® Partner, SAMSUNG has determined that this product meets the ENERGY STAR® guidelines for energy efficiency.

Preset Timing Modes

If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjust the screen as follows.

Table 1. Preset Timing Modes

 

 

 

 

Horizontal

Vertical

Pixel Clock

Sync Polarity

Display Mode

Frequency

Frequency

(MHz)

(H/V)

 

(kHz)

(Hz)

 

 

 

Image 49
Contents SyncMaster Notational PowerInstallation Insert the power plug firmly so that it does not come looseDo not use a damaged or loose plug Use only a properly grounded plug and receptacleKeep any heating devices away from the power cable Do not drop the monitor when moving itDo not place the product on the floor Set down the monitor carefullyDo not place the monitor face down CleanDo not spray water or detergent directly on the monitor Do not remove cover or back OthersNever insert anything metallic into the monitor openings Do not cover the vents on the monitor cabinetKeep power adapter away from any other heat source Keep all power adapters apartRemove and discard vinyl bag from power adapter before use Falling product could cause physical damage even death Unpacking Cable Sub Cable Power Cord DC-Adapter BracketNatural Color software Vesa Mounting Bracket User AdjustedFront Entertain High brightness Adjust buttons / +For watching motion pictures such as a DVD or VCD RearWall Mounting the Monitor Installing the Monitor Driver Automatic Click Windows ME Driver Windows MEWindows XP/2000 Click Windows XP/2000 DriverMicrosoft Windows XP Operating System Installing the Monitor Driver ManualPage How to install Microsoft Windows NT Operating System Click Start , Setting , Control PanelLinux Operating System Natural Color Natural Color Software Program How to install the Natural Color softwareAuto Description MenuOSD Lock & Unlock Menu Description MagicBrightBrightness Image Lock ContrastMenu Description Play/Stop PositionGeometry Reset Color Reset ResetDescriptionPlay/Stop MenuDescription Menu Description Half Tone LanguageMenu Position Menu Display Time Position PositonDisplay Mode Overview Installation Page Installationation Problems Hardware OSD Mode Picture Tab Definition Image Tab Definition Option Tab Definition Support Tab Definition Color Calibration Page Uninstall Troubleshooting Check List Solutions SymptomConnection, Check Signal Cable on Control Panel → Display → SettingsQuestion Self-Test Feature CheckAnswer Useful Tips Functioning properly Self-Test Feature CheckJudging the monitors working condition Input Signal, Terminated ResolutionPower Supply Signal CableState Normal Operation Power saving mode Power Switch off Dimensions WxDxH/ WeightVesa Mounting Interface Environmental considerationsVertical Frequency Horizontal FrequencyAustralia Brazil ServiceGermany United Kingdom PanamaFor Better Display TermsAuthority User Information FCC Information User InstructionsIC Compliance Notice MPR II Compliance Why do we have environmentally-labelled monitors?European NoticeEurope Only PCT NoticeEnvironmental Requirements What does labelling involve?Lead CadmiumTCO Development Why do we have environmentally labelled computers?Ergonomics Flame retardantsEnergy Ecology EmissionsTCO03 Recycling Information TCO03 applied model only Medical Requirement ClassificationsTransport and Storage Limitations Video In / RS 232 / Video OutPower Off, Screen Saver, or Power Save Mode What is Image retention ?Suggestions for specific applications