Troubleshooting
4-2-14 Satins on Back of Page
•Description The back of the page is stained at 56.1 mm intervals.
Digital Printer
Digital Printer
Digital Printer
Digital Printer
Digital Printer
Digital Printer
56.1 mm
Check and Cause | Solution |
|
|
1. Transfer roller is contaminated. | 1. Perform the OPC Cleaning Mode Print 2 or |
| 3 times. Run |
| mination of the transfer roller. |
2. Pressure roller is contaminated. | 2. Replace the transfer roller if contaminated |
| severely. |
| 3. Disassemble the fuser and clean the |
| H/R(Heat Roller) and P/R(Pressure roller). |
| And check the area between H/R and |
| Thermistor. If contaminated, clean the area |
| not to be deformed. |
|
|
4-2-15 Blank Page Print out (1)
• Description
Digital Printer
Digital Printer
Digital Printer
Digital Printer
Digital Printer
Blank page is printed.
Check and Cause | Solution |
|
|
Bad ground contacts in OPC and/or devel- | Remove contamination of the terminals of the |
oper. | developer and the unit. |
|
|
1. Blank page is printed.
• Description 2. One or several blank pages are printed.
3. When the printer turns on, several blank pages print.
Check and Cause |
| Solution |
|
|
|
1. Bad ground contacts in OPC and/or | 1. | Remove contamination of the terminals of |
developer. |
| the developer. |
2. Abnormal solenoid. | 2. Perform the engine self test using DCU to check | |
|
| if the Solenoid is normal.(refer to code 06) |
| 3. | If not solved by the above directions |
|
| Replace the engine board. |
| 4. Turn the power off, delete the data of PC | |
|
| and try printing again. |
|
|
|
Samsung Electronics |