Samsung ML-1650, ML-1651N specifications 3 JAM, 4 JAM

Page 38

Troubleshooting

4-3-3 JAM 1

1.Recording paper is jammed in front of or inside the fuser.

•Description 2. Recording paper is stuck in the discharge roller and in the fuser just after passing through the Actuator-Feed.

EXITSEN

EXITSEN

CASSETTE

JAM 1

 

 

Check and Cause

 

Solution

 

 

 

 

 

 

1.

If the recording paper is jammed in

1.

Replace the SMPS.

 

 

front of or inside the fuser.

 

 

 

 

(Perform DCU diagnostic code of)

 

 

 

2.

If the recording paper is stuck in the

2.

Reassemble the Actuator-Feed and

 

 

discharge roller and the fuser just

 

Spring-Actuator if the returning is bad.

 

 

after passing through the Actuator-

 

 

 

 

Feed, Feed Actuator may be defec-

 

 

 

 

tive.

 

 

 

 

 

 

 

4-3-4 JAM 2

1.Recording paper is jammed in front of or inside the fuser.

•Description 2. Recording paper is stuck in the discharge roller and in the fuser just after passing through the Actuator-Feed.

EXITSEN

EXITSEN

CASSETTE

JAM 2

 

Check and Cause

Solution

 

 

 

 

1. If the paper is completely fed out of

1. Check if the exit sensor actuator is

 

the printer, but Jam 2 occurs : Exit

defective.

 

sensor is defective.

• Check if the actuator exit is unformed

 

• After the paper is completely dis-

(Check if the lever part is unformed

 

charged, actuator Exit should return

in shape).

 

to the original position to shut the

• Check whether burrs occur in the

 

photo-sensor. Sometimes it takes

assembly part of the actuator exit or

 

longer hour than it should and does

not and if the actuator is smoothly

 

not return.

operated.

 

 

• Check if foreign matters and wire get

 

 

caught in the actuator exit's operation.

 

2. If the paper is rolled in the Fuser Roller:

2. If the paper is stuck in the fuser : dis-

 

• This occurs when a Guide claw is

assemble the fuser and remove the

 

broken away or transformed.

jammed paper, and clean the surface

 

• It occurs when the Spring of a Guide

of the pressure roller with dry gauze.

 

claw is broken away or transformed.

 

 

• It occurs when the Heat-Roller or

 

 

Pressure-Roller is seriously contami-

 

 

nated with the toner.

 

 

3. Paper is accordion in the fuser.

3. Remove the jammed paper after disas-

 

 

sembling the fuser : Clean the surface

 

 

of the pressure roller with dry gauze.

 

 

• Remove the toner particles stained

 

 

on the rib.

 

 

• Check the assemblage and perfor-

 

 

mance of the exit.

 

 

 

4-14

Samsung Electronics

Page 37 Page 39
Image 38
Page 37 Page 39
Contents Laser Printer Version no This manual is stated and provided for service description Safety Precautions Read each caution carefullyPrecautions on Disassembly and Reassembly Releasing Plastic LatchesTools for Troubleshooting Electronic ScalePaper ML-1650 ML-1651N EngineController TonerML-1650 ML-1651N Environment NetworkWhenever servicing the machine, you must perform as follows General Precautions on DisassemblyReleasing Plastic Latches Transfer Roller Controller Board Pickup Assembly Main Cover Exit Assembly MP Multi-Purpose TrayLSU Hvps board10 Fan SolenoidDrive Assembly To remove the thermostat from the fuser assembly Fuser AssemblyTo remove the thermistor from the fuser assembly To remove the halogen lamp from the fuser assemblyGuide Feed & Erase Lamp To replace the pickup roller MPF Assembly and Miscellaneous on MPF AssemblyTo replace the nockup plate To replace the pickup holder and the Adjust End MP To replace the Paper Empty PE sensorEngine Board and Miscellaneous To replace the exit board To replace the actuator feed To remove the transfer guideCause and solution of the bad discharge How to use DCUCause and solution of Bad image Cause and solution of the malfunctionCode How to use DCUDCU Setup Self Diagnostic Mode Self Test Button Paper Path LayoutML-1650 Diagnostic Control Unit Quick Referance DCU PanelVertical Black Line and Band Cause and solution of Bad imageCheck and Cause Solution Vertical White LineHorizontal Black Band Black/White SpotLight Image Dark Image or a BlackUneven Density BackgroundGhost Satins on the Face Satins on Back Blank Page Print out2 JAM Cause and solution of the bad dischargeWrong Print Position 3 JAM 4 JAMMulti-Feeding Paper rolled in the fuser7 OPC All LEDs blinking Scan Error Cause and solution of the malfunctionAll LEDs blinking Fuser Error Paper Empty without indication Not function of the gear of the fuser due to melting awayPaper Empty No lamp on when the cover is open Cover OpenNo Power Defective motor operationVertical Line Getting Curved Toner Cartridge Service Partially blank Fault Signs Cause & Check Solution Light imageSigns and Measures at Poor toner cartridge ImageFault Signs Cause & Check Solution White Black spot Recycled productFault Signs Cause & Check Solution Ghost & Image Cause and solutions of bad environment of the software Printer is not workingUtilities program Abnormal Printing Spool Error How to delete the data in the spool managerExploded Views and Parts List Exploded Views and Parts List Service Parts List10-3 10-4 All Exploded Views and Parts List Cover Exploded ViewFrame Exploded View Exit Exploded View Rack-MPF Exploded View Fuser Exploded View Drive Exploded View Pick-Up Exploded View Cassette Exploded View Block Diagram Video ControllerBlock DiagramEngine Block Diagram SensorConnection Diagram VPS
Related manuals
Manual 179 pages 8.77 Kb

ML-1650, ML-1651N specifications

The Samsung ML-1651N and ML-1650 are reliable monochrome laser printers designed for small to medium-sized businesses and home offices. These printers offer a blend of performance, efficiency, and affordability, making them suitable for various printing needs.

One of the standout features of both models is their print speed. The ML-1651N boasts a speed of up to 22 pages per minute, while the ML-1650 offers a slightly lower speed but still impressive for standard office tasks. This fast output is complemented by a first page print time of approximately 8.5 seconds, ensuring that users can quickly produce documents without unnecessary delays.

In terms of print quality, both printers deliver sharp, clear black text and detailed graphics, thanks to a print resolution of up to 1200 x 1200 dpi. This high resolution is essential for producing professional-looking documents, which is crucial in a business environment.

The Samsung ML-1651N and ML-1650 are equipped with a 250-sheet input tray, accommodating various paper sizes and types. Additionally, both printers support manual duplex printing, allowing users to save paper by printing on both sides of the page. The ML-1651N also features a built-in network interface, providing easy connectivity for multiple users on a local network. This is particularly beneficial for businesses where collaboration and document sharing are essential.

Another noteworthy characteristic is their energy efficiency. Both models comply with Energy Star standards, reducing electricity consumption and helping organizations lower their operational costs. The Eco Mode feature further enhances sustainability by optimizing power usage during printing tasks.

The compact size of the ML-1651N and ML-1650 makes them suitable for smaller workspaces where printer footprint is a consideration. Despite their size, they have a robust build quality, ensuring longevity and reliability in daily use.

Lastly, both models are compatible with various operating systems, including Windows and Mac, ensuring versatility in different computing environments. With their blend of speed, efficiency, and quality, the Samsung ML-1651N and ML-1650 remain solid contenders in the monochrome laser printer market. They are ideal choices for users seeking reliable, cost-effective solutions for their printing requirements.
Top Page Image Contents