Altec Lansing MX5021 manual Headphones, System Specifications

Page 5

TREBLE

Press the treble button on the hardwired controller or wireless remote. A blue EQ LED will illuminate next to the treble button. When using the hardwired controller, turn the master volume knob clockwise to increase the treble and counter-clockwise to decrease the treble.

When using the remote, press and hold “+” button to increase the treble or press and hold the “–” button to decrease the treble.

An LED will light up and move on the wired controller to indicate changing treble levels. The LED will reside in the far right position for maximum treble and in the far left position for minimum treble.

After a few seconds, treble will default back to main volume. To return to treble control, press the treble button again.

STAND-BY

To mute the MX5021 press the stand-by button on the hardwired controller or wireless remote. The blue LED located next to the power button will turn off. To un-mute, press the stand-by button again.

It is important to note that while in stand-by mode the system continues to receive power. To completely shut down the MX5021, press the standby button on the hardwired controller or wireless remote and then unplug the unit from the wall.

HEADPHONES

To use headphones with the system, plug them into the labeled jack on the side of the wired controller. When headphones are connected, both satellites and the subwoofer are muted.

SYSTEM SPECIFICATIONS

SPL:

103 dB

 

POWER REQUIREMENTS

 

 

 

 

 

 

 

 

 

Driver (per Satellite):

Two 3" full-range drivers

 

USA, Canada and applicable

 

 

 

 

and one 1" tweeter

 

Latin American countries:

120 V AC @ 60 Hz

 

 

 

 

 

 

 

SUBWOOFER

 

 

 

 

 

 

 

Europe, United Kingdom,

 

 

 

 

 

 

applicable Asian countries,

 

 

Driver:

One 6.5" long-throw woofer

 

 

 

 

Argentina, Chile and Uruguay:

230 V AC @ 50 Hz

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ETL/cETL/CE/NOM/IRAM Approved

 

 

 

 

 

 

 

 

 

TROUBLESHOOTING

SYMPTOM

POSSIBLE PROBLEM

SOLUTION

Can’t insert

Some of the pins are bent.

Try to gently straighten the pins with tweezers or very small pliers. If this

the wired

 

does not work, contact the Altec Lansing Consumer Support Department for

controller’s DIN

 

further instructions.

connector into

 

 

the subwoofer.

 

 

 

 

 

No LEDs are lit.

Power isn’t turned on.

Press the Power button on the wired controller or remote control.

 

 

 

 

Power adapter isn’t connected to the wall outlet

Disconnect and then reconnect the power adapter to both the wall outlet and

 

and subwoofer.

the subwoofer.

 

 

 

 

Surge protector (if used) isn’t powered on.

If the power adapter is plugged into a surge protector, make sure the surge

 

 

protector is switched on.

 

 

 

 

Wired controller isn’t connected to the subwoofer.

Connect the wired controller to the subwoofer.

 

 

 

 

Wall outlet not functioning.

Plug another device into the same jack on the wall outlet to ensure the outlet

 

 

is working.

 

 

 

Controller

DIN connector not inserted in subwoofer jack.

Verify that the grey-colored DIN connector is firmly inserted into the DIN

doesn’t work.

 

connector jack on the subwoofer. Ensure the pins are aligned between the

 

 

plug and jack. Remember, the arrow should be facing up.

 

 

 

3

Image 5
Contents MX5021 FCC Instructions for a Class B Digital Device or Peripheral ONE-YEAR Limited Warranty Safety InstructionsConnecting the Power Cord AC Wall Socket Powering on BOX ContentsUsing the Remote Control & Wired Controller Placing SpeakersTroubleshooting Symptom Possible Problem Solution HeadphonesSystem Specifications Symptom Possible Problem Solution Avertissement Consignes DE SécuritéConnexion DU Câble D’ALIMENTATION Prise Murale CA Garantie Limitée À UN ANContenu DE L’EMBALLAGE Installation DES EnceintesBranchements Mise Sous TensionCaractéristiques Techniques Conseils DE Dépannage Symptôme Problème Possible SolutionCasque D’ÉCOUTE Symptôme Problème Possible Solution Garantía Limitada DE UN AÑO Instrucciones DE Seguridad PrecauciónAdvertencia Ubicación DE LOS Parlantes Tenido DE LA CajaCómo Hacer LAS Conexiones EncendidoFicha Técnica AudífonosSíntoma Problema Posible Solución Advertência Instruções DE Segurança CuidadoConectando O FIO DE Força Soquete DE Parede CA Garantia Limitada DE UM ANOColocando OS ALTO-FALANTES Conteúdo DA CaixaFazendo AS Conexões LigandoSTAND-BY Compasso DE Espera Diagnóstico DE Falhas Sintoma Possível Problema SoluçãoOuvidos Especificações do SistemaSintoma Possível Problema Solução Page 852 2735-7331 Fax 852

MX5021 specifications

Altec Lansing has long been a name synonymous with quality audio solutions, and the Altec Lansing MX5021 is no exception. This multimedia speaker system is designed to deliver premium sound quality for both music and multimedia usage, appealing to audiophiles and casual listeners alike.

The MX5021 features a 2.1 speaker configuration, which includes two satellite speakers and one powerful subwoofer. This configuration enhances the overall audio experience by providing rich, deep bass and clear treble. The subwoofer is especially noteworthy, featuring a robust, ported design that allows for powerful low-frequency sounds, making it ideal for bass-heavy music, movies, and gaming.

One of the main defining characteristics of the MX5021 is its impressive power output. With a combined wattage of 200 watts, it ensures that every sound is reproduced with clarity and precision, filling even larger rooms with vibrant audio without distortion. The system includes a built-in amplifier for seamless integration, allowing users to connect a variety of devices effortlessly.

The design of the MX5021 reflects Altec Lansing's commitment to aesthetics as much as performance. The satellite speakers come in a sleek and modern finish, blending seamlessly with contemporary home decor. The subwoofer is equally stylish, designed to complement the satellite units while delivering maximum audio impact.

An important feature of the MX5021 is its versatility; it includes multiple input options. Users can connect their computers, televisions, or gaming consoles with ease, thanks to the standard RCA and 3.5mm inputs. This flexibility ensures that the system can be integrated into virtually any audio setup.

On the technology front, the MX5021 employs advanced audio processing techniques that enhance sound quality. This includes the implementation of crossover technology that separates audio frequencies effectively, allowing for a more balanced sound profile.

For convenience, the MX5021 comes equipped with an easy-to-use remote control, making it simple to adjust the volume, bass, and treble levels from the comfort of your seat. This user-friendly feature adds to the overall experience and accessibility of the speaker system.

In summary, the Altec Lansing MX5021 is a top-tier multimedia speaker system that combines powerful sound performance, flexibility in connectivity, and sleek design. With its ability to deliver immersive audio experiences for various applications, it remains a popular choice for audio enthusiasts seeking a reliable and quality speaker system.