Installation, EN-14 | Acer UM.WG6AA.B01, G236HL, UM.VG6AA.B02

INSTALLATION

To install the monitor to your host system, please follow the steps as given below:

Steps

1.1-1 Connect Video Cable

a.Make sure both the monitor and computer are powered-OFF.

b.Connect the VGA video cable to the computer.

1-2 Connect the digital cable (only for dual-input models).

a. Make sure both the monitor and computer are powered-OFF. b. Connect one end of the 24-pin DVI cable to the back of the monitor and connect the other end to the computer’s port.

1-3 Connect one end of the 19-pin HDMI cable to the back of the

monitor and connect the other end to the computer’s port (Optional). 1-4 Connect the Audio Cable(Optional)

2.Connect the adapter

a Connect the AC cord to the adapter.

b Connect one end of the adapter to the monitor and the other end to a properly grounded, AC outlet .

3.Power-ON Monitor and Computer

Power-ON the monitor first, then power-ON the computer. This sequence is very important.

4.If the monitor still does not function properly, please refer to the troubleshooting section to diagnose the problem.

HDMI

DVI

VGA

DVI	D-SUB	AUDIO OUT	DC-IN
HDMI