Acer G236HL, UM.VG6AA.B02, G226HQLBbd, UM.WG6AA.B01 manual EN-15

Page 16

USER CONTROLS

Power Switch / Power LED:

To turn the monitor ON or OFF.

Lights up to indicate the power is turned ON.

Using the Shortcut Menu

Press the function button to open the shortcut menu. The shortcut menu lets you quickly select the most commonly accessed settings.

Empowering:

Press the Empowering Key to open the Acer eColor Management OSD and access the scenario modes.

AUTO Auto Adjust:

Press this button to activate the Auto Adjustment function. The Auto Adjustment function is used to set the HPos, VPos, Clock and Focus.

MENU OSD functions

Press this botton to activate the OSD menu.

INPUT Input Key

Use Input key to select from different video sources that may be connected to your monitor.

(a) VGA input (b) DVI input

As you cycle through the sources you will see the following messages on right top side of screen to indicate currently selected input source. It may take 1 or 2 seconds for the image to appear.

VGA or DVI

If either VGA or DVI input is selected ,but the VGA and DVI cables are not con- nected, a floating dialog box indicates:

“No Cable Connect” or “No Signal”

EN-15

Image 16
Contents Table of Contents Special Notes on LCD Monitors EN-1Safe listening Safety instructionsEN-2 Product servicing LCD Pixel StatementTips and information for comfortable use Finding your comfort zoneDeveloping good work habits Taking care of your visionEN-4 Unpacking EN-5Screen Position Adjustment EN-6Connecting the Power Cord Safety PrecautionCleaning Your Monitor EN-7DDC EN-8Connector PIN Assignment Pin Color Display Signal CableGround Ground DDC-Serial ClockEN-10 EN-11 EN-12 EN-13 Installation EN-14EN-15 Acer eColor Management Operation instructions EN-16Adjusting the OSD settings EN-17EN-18 EN-19 EN-20 Troubleshooting EN-21DVI mode EN-22Declaration of Conformity Federal Communications Commission Declaration of Conformity