Haier WL19T1, WL22T1 user manual Remote Control, Installing Batteries

Page 7

Remote Control

Installing Batteries

1.Slide open the cover of the battery compartment on the back of the remote control.

2.Load two 5# alkaline batteries in the compartment. (plus and minus poles to respective mark)

3.Replace the cover of the battery compartment.

1

2

3

 

 

Precautions

Make sure that there is no obstacle between the remote controller and television set.

Keep the remote controller away from heat source or humid area to ensure effective performance of the remote controller.

As strong light may interfere the signals, change your position to operate the remote controller if the television cannot be turned on or off as you expect.

Make sure that two 5# 1.5V alkaline batteries are loaded. The batteries must be of the same type. The batteries must be located properly. The batteries are not rechargeable.

Image 7
Contents LCD TV Receiver To users ContentSafety Notice Items Control Panel Function Front Panel ControlsPC Audio Input Video Input Connection OptionsMute Remote Control Key FunctionsInstalling Batteries Remote ControlGrounding Connection InstructionsYPbPr Input VGA InputComponent Input ports Video InputExternal AV Source Input Cable TV InputMute Basic Operating InstructionsTurn on the LCD-TV Audio ControlSelect the TV Channel You Want Picture Menu Options Menu OperationsFunction Audio Menu OptionsTheatre Function Menu Options Adjust Menu Options Tuning Menu Options Exchange From Teletext Time To assist in location possible faults use help guide below Troubleshooting Guide5W+1.5W SpecificationsPage Page V0.1 0090508262I