Chapter2Connections
Connecting to an audio system (Continued)
Via HDMI output
• Set “Digital out HDMI” ( page 53).
HDMI cable (supplied)
You may need to adjust the HDMI audio output to match the capabilities of your AV amplifier. In this case, set “Digital out HDMI” ( page 53) to “PCM”.
HDMI input
AV amplifier
HDMI output
HDMI cable (not supplied)
HDMI compatible device
Caution
When you are connecting (via the HDMI OUTPUT jack) an AV decoder that does not have Dolby Digital or DTS decoding capability, be sure to set “Digital out HDMI” ( page 53) to “PCM” or “Downmixed PCM”. Otherwise, high volume sound may damage your hearing as well as the speakers.
Note about audio capabilities
Dolby Digital Plus and
Dolby TrueHD processing for two channels only.
HDMI input
24