Toshiba HD-XA1, hd-xa1kn owner manual Language

Chapter6Others

Customizing the function settings (Continued)

Audio

Speaker Setting

To select various parameters for the analog 5.1 channel output.

5.1ch

When a 5.1 channel surround system is connected to this player.

Go to the next step (see below) for detailed selections.

2ch

When a 2 channel stereo system is connected to this player.

When you selected “5.1ch”:

Set the speaker sizes, distance to each speaker and the crossover frequency.

1	Select a speaker by pressing	/ / / buttons, and
	press OK button.
2	Select the size by pressing /	buttons, and press OK
	button.
	Front Left / Front Right

	Small:	Select if the speaker cannot output low
		frequency.
	Large:	Select if the speaker can output low
		frequency.
	Center / L Surround / R Surround
	Small:	Select if the speaker cannot output low
		frequency.
	Large:	Select if the speaker can output low
		frequency.
	None:	When the speaker is not connected.
	Subwoofer
	Use:	When a subwoofer is connected.
	Don’t Use: When a subwoofer is not connected.
	Crossover Setting
	Low frequency under which you set here will be of a
	subwoofer. Select one from 80 Hz/100 Hz/120 Hz.
	Ft
	Select a distance to each speaker from the listening
	position.
3	Select “Next” by pressing		/ / / buttons, and press
	OK button.
	The next screen appears.
4	Select “Automatic Test Tone” by pressing / /			/
	buttons, and press OK button.
	A test signal is sent to each speaker. Adjust each of the
	volumes by pressing /		, selecting speakers by	/ ,
	so that each speaker can sound at the same volume.

For further adjustment, check the channel balance on the amplifi er.

5 When complete, select “OK” and press OK button.

Language

Disc Menu Language

To select a preferred language for disc menus.

English

To display disc menus in English.

French

To display disc menus in French.

Japanese

To display disc menus in Japanese.

Others

To make a further language choice.

After pressing OK button, follow steps 1) – 4) below.

1)Obtain the language code of the preferred language from the Language code list ( page 58).

2)Select the fi rst character by pressing / buttons.

3)Press / buttons to shift. Select the second character by pressing / buttons.

4)Select “OK” and press OK button.

Note

Some discs may be played in a different language from that you selected. A prior language may be programmed by the disc.

Subtitle Language

To select a preferred language for subtitles.

None

To disable subtitles.

English

To display subtitles in English.

French

To display subtitles in French.

Japanese

To display subtitles in Japanese.

Others

To make a further language choice.

After pressing OK button, follow steps 1) – 4) below.

1)Obtain the language code of the preferred language from the Language code list ( page 58).

2)Select the fi rst character by pressing / buttons.

3)Press / buttons to shift. Select the second character by pressing / buttons.

4)Select “OK” and press OK button.

54