Remote control other equipment | Technicolor

TV_DVD_LCD_en 17/06/02 11:45 Page 5

Remote control : other equipment

The remote control supplied with your TV/DVD may vary depending on the model you have chosen. Same remote controls can be used for other equipment, such as video recorders, DVD players, satellite receivers or Hi-fi systems. This page provides information concerning the remote control’s use with these other types of equipment.

Only makes of apparatus of the THOMSON group benefit from the actions of all the keys.

Video recorder

Satellite Receiver

Hi-fi system

Set the switch to vcr

Set the switch to sat

Set the switch to hifi

Standby / On

To display the menu

Vertical scrolling in menus

Horizontal scrolling in menus

Confirmation an action

Exit the menus

Direct access to the

To select a radio station using

programmes or enter the

its number

numeric values

To change channels

To change stations

Select the AV input.

To switch the sound off and

back again

To set the volume level

VCR functions

DVD

PROGRAMMING THE REMOTE CONTROL

1.Set the selector switch to the unit you witsh to use the remote control with.

2.Hold the tv menu button down and enter one of the 3-digit codes corresponding to the make of your unit (the code list can be found at the end of this manual).

3.Release the tv menu botton.

4.Set your unit (vcr,DVD, HiFi,etc) in standby mode by pressing the B button on the remote control. If this does not work, try another code.

Depending on the age or type of some products,certain functions may not be available. Certain codes may cover more functions than others.Test the functions that you can control and maybe try other codes.When you change the batteries in the remote control unit, remember to reprogram it. Note the code or codes which are best suited here.

VCR

SAT

HIFI