Atlantic Technology SYSTEM10LCR Home Theater Locations of Choice, Surround Speaker Locations

Page 3

System 10 InWall Speakers

Home Theater Locations of Choice

Left/Center/Right Locations

The front three speakers should be at ear height when seated, just as with as stereo speakers. Unfortunately, the presence of the television tends to make this difficult, if not impossible to achieve. (Unless you’re using a front projector and a perforated screen with the center channel speaker directly behind it). The closer you can get to this ideal the better, however. Try to keep the left and right speakers within 3 feet to either side of the TV screen. If possible, place the left and right speakers no more than 2 feet above or below the height of the center channel speaker. The center speaker itself should be centered on, and directly above or below the TV screen.

IMPORTANT: The System 10 LCR speaker was designed to be used in a vertical (portrait) orientation, if at all possible. The dispersion characteristics of the speaker are optimized in this position.

The All Important Surround Speakers

In order to achieve optimum performance we strongly recommend Dipole surround speakers like the System 10 SR. The following placement recommendations apply to all Dipole surround speakers (whether the System 10 SR or another model) Please try to follow them.

Dipole surrounds produce a wide, diffuse, relatively non-localizable sound field that projects to the sides of the speaker. Directly in front of the speaker there’s a sound “null” or dead zone. When properly placed in the room, with the apex null aimed at the listeners, this creates the illusion that the sound is coming from a large area to both sides of the speaker! The result is that you’re immersed in the surround field and become one with the action taking place up on the screen.

Surround Speaker Locations

The absolute best place for a Dipole surround is directly to the sides of the prime listening position (+/- 15 degrees). They should be located no less than 18 inches above ear height when seated and at least 24 inches below ceiling level. If the surround speakers must be located closer than 24 inches to the ceiling they should be turned upside down to keep the tweeters as far as possible from the ceiling. Please see the important note below.

System 10 SR surrounds are designed to mount horizontally, on the side walls. If they must be placed on the back wall or the ceiling, please follow these guidelines. On the rear wall, install the speakers horizontally at least 24 inches away from the corner, and between 18 inches above ear level when seated and 24 inches down from the ceiling. If installed in the ceiling, position them with the drivers facing the front and back of the room, with the Left speaker on the left side of the room and the Right on the right side. As much as possible keep the null centered on the prime listening position.

IMPORTANT: Please note that there are dedicated left and right Dipole surround speakers and they are labeled as such. This is done to ensure that the drivers facing the front of the room are in phase with the system’s front speakers. Left and right refer to the left and right wall when you are seated facing the screen. If the speakers must be mounted upside down on the side walls, as outlined above, be sure to swap them from side to side in order to maintain proper phasing with the fronts.

In any case, please note that for the greater part of any movie you should not be directly aware of the surround speaker’s presence. They’re there to create those environmental sounds of the location up on the screen. So in a rain filled scene you should be thinking, “Is it raining outside my house?”, not “Hey, I hear the rain in the surround speakers!”

Non-Dipole surrounds

If you decide to use a Monopole for the surrounds (like the System 10 LCR) keep the following in mind. With non- Dipole surrounds, the more directly they are aligned with your ears, the more localizable their sound. And since the vast majority of surround information consists of sonic cues that aren’t supposed to be localized, this is particularly undesirable. Generally then, non-Dipole surrounds should be placed well above ear level on the side or rear walls. As opposed to Dipoles, Monopoles and Bipoles work best when placed on the side or rear wall, well above and not aimed directly at the listening position.

● ● ● ● ● ● ● 3● ●● ●● ●● ● ● ● ● ● ●

Image 3
Contents System 10 LCR System 10 SR Dipole Surround Important Considerations Before Installation Stereo SystemsHome Theater Systems Left/Center/Right Locations Home Theater Locations of ChoiceSurround Speaker Locations Non-Dipole surroundsInstallation of System 10 LCR in Existing Construction Installation of System 10 LCR in New ConstructionInstallation of System 10 SR Dipole Surround Page System 10 SR Surround System 10 LCR24 O.C. Studs 17.5 System 10 LCR InWall Enclosure Recommendations

SYSTEM10LCR, SYSTEM10SRDIPOLESURROUND specifications

Atlantic Technology offers innovative audio solutions designed to enhance your home theater experience, and two of their standout products are the SYSTEM10SRDIPOLESURROUND and SYSTEM10LCR speakers. These models exemplify cutting-edge technology and thoughtful design, catering to audiophiles and casual listeners alike.

The SYSTEM10SRDIPOLESURROUND speaker is engineered to create an immersive sound environment using its unique dipole configuration. This design allows the speaker to deliver sound from two sides, dispersing sound waves throughout the listening area, which creates a more enveloping experience and minimizes reflection from walls. The dipole design is especially effective in rear surround channels, producing a more cinematic feel by blending sound seamlessly into the background. The key feature of the SYSTEM10SRDIPOLESURROUND is its adjustable switching capability, allowing users to toggle between dipole and monopole operation, depending on their listening preferences and room acoustics.

Complementing the surround experience is the SYSTEM10LCR, a versatile speaker designed for left, center, and right channel operations. Featuring a sleek, low-profile design, the SYSTEM10LCR is not only sophisticated in sound but also complements any home decor. This speaker effectively utilizes high-quality drivers and advanced crossover technology to ensure clarity and precision across the frequency spectrum. With a robust cabinet construction, the SYSTEM10LCR minimizes cabinet resonance, leading to cleaner sound reproduction.

One of the critical characteristics of both the SYSTEM10SRDIPOLESURROUND and SYSTEM10LCR speakers is their compatibility with high-resolution audio formats. They are designed to handle a wide dynamic range, resulting in the ability to reproduce subtle nuances in music and movie soundtracks. The durable build quality ensures longevity, while the aesthetic appeal accommodates various room environments.

In conclusion, Atlantic Technology's SYSTEM10SRDIPOLESURROUND and SYSTEM10LCR speakers represent a marriage of innovative technology and elegant design. Their dipole surround capabilities and versatile LCR function make them an ideal choice for anyone looking to elevate their audio experience, whether for film, music, or gaming. With these speakers, Atlantic Technology continues to set a standard in the home entertainment market, ensuring users receive an unparalleled auditory journey.