DVD Player Operation
Disc Loading Steps:
1.Press the POWER button to turn on the LCD TV. Press the Input button and select DVD mode, press the Enter button confirm and select DVD mode.
2.Handing the disc with its printed side facing the front of the unit, insert vertically into the disc tray. (Referring to the below picture.)
3.Gently push the disc into the disc tray.
4.Disc will automatically be pulled into the disc player. “Loading” will appear on the liquid crystal display and playback will begin.
Warning: Do not play poor quality discs as they may damage the player.
DVD Playback
Region Code
DVD players and discs are coded by region. These regional codes must match the played discs. If the codes don’t match, the disc cannot be played. This player’s default code is region 1.
Play
Press the Play button to start playback. Press the STOP button once on the remote control to stop playback, and press the Play button again to resume playback.
Stop
Press the ■ Stop button once to stop playback and then press Play button to resume. Press this button twice to stop playback completely.
- 31 -