Troubleshooting
SYMPTOM | CHECK ITEM | |
|
| |
| Make sure a disc is loaded in. | |
| Make sure disc is not loaded upside down. | |
The player does not play. | Make sure disc is not dirty or warped. | |
Make sure the player’s region code is the same as region code of | ||
| DVD disc. | |
| Make sure water condensation has not occurred. If it occurs, | |
| take out disc and leave the player on for at least one hour. | |
| Make sure system’s connection is correct. | |
| Make sure the sound setup of DVD disc is correct. | |
There is no sound. | Make sure disc is not dirty or warped. | |
Clean or replace the disc. | ||
| ||
| Make sure the speakers are not muted. | |
| In the TV mode, set the correct sound mode. | |
|
| |
LCD does not display an image | Make sure the unit is turned on and the connections are correct. | |
Make sure the power cord is correctly connected. | ||
or is blank. |
| |
DVD does not continue to play | Make sure the Pause button is pressed. Then press the | |
or plays the same section | many times as needed to play the disc. | |
repeatedly. | Make sure disc is not dirty or damaged. | |
|
| |
| Check if the connections with the external AV signal source are | |
There is no picture or picture | correct. | |
Correctly set the items in the picture menu. | ||
moves up and down. | Check to see if you have made the correct video input/output | |
| connections. | |
| Make sure the unit is turned on and in correct video type. | |
| Make sure there are no obstructions between the remote | |
The remote control does not | control and the player. | |
Make sure the remote control is pointing at the player. | ||
work. | ||
Make sure batteries are inserted and the polarity is correct. | ||
| ||
| Make sure batteries are not weak. | |
|
|
Other Notes:
Static or other external interference may cause the player to behave abnormally. In this occurrence, unplug the
- 43 -