PLAYING A DISC
Display function
While the disc is playing, press the DISPLAY button on the remote control repeatedly to display information on operation status.
DVD | CD |
Single Elapsed
Single
Elapsed 
Total
special function
Locating a specific title/Chapter
If a DVD contains title/chapter numbers, you can locate a specific title/chapter by directly selecting a title/ chapter number.
1. In STOP/PLAY mode, press the GOTO button.
2.Press the 
or 
button to highlight a specific field and press the 
or 
button button to select the title/chapter
you want.
3.Press the ENTER button to confirm. Playback starts from the selected title/chapter.
Locating a Specific Time
You can move to a specific location by entering its corresponding time (hours, minutes, seconds).
1.Press the GOTO button twice for DVD (once for CD), a screen shown as right will be displayed on the screen.
2. Enter the corresponding number buttons for the setting point you want.
3. Press the ENTER button to confirm. Playback starts from the selected location.
NOTE:
•If the time numbers you entered is not permited by the disc, after you press the ENTER button, 
will appear on the screen. You should reset and enter correct numbers.
•Some discs may not respond to this process.
•Some scenes may not be located as precisely as specified.
•This method for accessing specific locations is available only within the current title of the disc.
18
RCA SPS36123 Eng IB W011.indd 19
8/18/2009 4:29:55 PM 