W220S
Multi Function 2D/3D Wide Monitor
11. Troubleshooting | If your monitor is not functioning properly, you may be able to solve the problem | ||
| by following the suggestions below : | ||
|
|
|
|
| Problem | Possible solution |
|
| Blank screen | If the power LED is not lit, push the Soft power switch or check the |
|
|
| AC cord to turn the monitor on. If the display unit is powered |
|
|
| through the computer, check that the computer is switched on. |
|
|
| The display unit might be in standby mode. Push one of the |
|
|
| keyboard keys. Check that the keyboard is properly connected to |
|
|
| the computer. |
|
|
| Check that the signal cable connector is properly connected and that |
|
|
| the connection pins are not bent or damaged. If the connector is |
|
|
| loose, tighten the connector's screws. |
|
|
| Check that the power cable is correctly connected to the display unit |
|
|
| and to the power outlet. |
|
| Error message: | Check the resolution and the frequency on the video port of your |
|
| Video mode not | computer. |
|
| supported |
|
|
|
| Compare these values with the data in the Preset Timing Table. |
|
| The display does | The video signal from the computer does not comply with VESA |
|
| not enter power | DPMS standard. Either the computer or the graphics adapter is not |
|
| management | using the VESA DPMS power management function. |
|
| mode |
|
|
24/27