English
Instructions for use
4. Extra possibilities
Adjusting device selection (Mode selector)
The SRU 5040 is default set for operating TV,VCR, STB (settop box, satellite or cable decoder) and DVD.You can select the device you wish to operate with the SELECT key (mode selector). Each option allows operation of one device only. If desired, you can program the SELECT key (mode selector) to select a different kind of device. For example, if you want to operate a second TV.
In the following example you will see how to configure the STB mode for a second TV.
1Switch on the second TV.
2Press the SELECT key to select STB. Press the key until STB lights up in the
selector window.
3 Then keep keys 1 and 6 on the SRU 5040 pressed simultaneously for five seconds, until STB in the selector window lights up.
4 Press keys 9, 9 and 2, in that order.
5Press the SELECT key to select TV.
Press the key until TV lights up in the selector
window.
6 Press the 1 key.
– STB in the selector window flashes twice. STB will now allow you to operate your second TV.
7Program the SRU 5040 to operate the second TV. See ‘Setting the remote control’.
Adding a function to the remote control
If you want to add a function to the SRU 5040, you can contact the
Philips service line for Universal Remote Control to ask for the
8