NEC P461 user manual English-23

Page 25

OSD TRANSPARENCY

Set the transparency level of the OSD.

TYPE2

 

 

 

 

 

OFF

 

 

 

 

 

 

 

TYPE1

 

 

 

 

 

 

 

TYPE2

 

 

 

 

 

 

OSD ROTATION

Determines the OSD display direction between landscape and portrait.

LANDSCAPE

 

 

 

 

 

LANDSCAPE

Display the OSD with landscape mode.

 

 

 

 

 

 

PORTRAIT

Display the OSD with portrait mode.

 

 

 

 

 

INPUT NAME

You can set currently displayed INPUT name as you like.

-

 

 

Max: 8 characters, including Space, A-Z, 0-9, and some symbols.

 

 

 

 

 

CLOSED CAPTION

Activates closed captioning (for U.S. only).

OFF

 

 

 

 

OSD RESET

Resets the following settings within the OSD menu back to factory setting:

-

 

 

OSD TURN OFF, OSD POSITION, INFORMATION OSD, OSD TRANSPARENCY,

 

 

 

CLOSED CAPTION.

 

 

 

 

MULTI DISPLAY

 

 

MONITOR ID

Sets the monitor ID number from 1-100 and group ID from A-J.

1

 

 

NOTE: Group ID is made of multiple selections.

 

 

 

 

 

IR CONTROL

Selects the mode of the monitor for use with the infra-red remote control when using the

NORMAL

 

 

RS-232C daisy chain.

 

 

 

 

 

 

NORMAL

The monitor will be controlled normally by wireless remote controller.

 

 

 

 

 

 

PRIMARY

Choose ÒPRIMARYÓ for the first monitor within an RS-232C daisy chain.

 

 

 

 

 

 

SECONDARY

Choose ÒSECONDARYÓ for all subsequent monitors within an RS-232C daisy chain.

 

 

 

 

 

 

LOCK

Prevents the monitor from being controlled by wireless remote controller. To return to normal

 

 

 

operation, press the ÒDISPLAYÓ button on the remote controller for 5 seconds.

 

 

 

 

 

TILE MATRIX

Allows one image to be expanded and displayed over multiple screens (up to 100) through a

 

 

 

distribution amplifier.

 

 

 

NOTE: Low resolution is not suitable for tiling to a large number of monitors.

 

 

 

 

 

 

H MONITORS

Number of monitors arranged horizontally.

1

 

 

 

 

 

V MONITORS

Number of monitors arranged vertically.

1

 

 

 

 

 

POSITION

Select which section of the tiled image to be displayed on the monitor.

1

 

 

 

 

 

TILE COMP

Turns the TILE COMP feature on.

NO

 

 

 

 

 

ENABLE

Enables Tile Matrix.

NO

 

 

 

 

POWER ON DELAY

Adjusts the delay time between being in ÒstandbyÓ mode and entering Òpower onÓ mode.

0 Sec.

 

 

ÒPOWER ON DELAYÓ can be set between 0 and 50 seconds.

 

 

 

 

 

POWER INDICATOR

Turns ON or OFF the LED located at the front of the monitor.

ON

 

 

If ÒOFFÓ is selected, LED will not light when the LCD monitor is in active mode.

 

 

 

 

 

EXTERNAL CONTROL

 

RS-232C

 

 

 

 

 

CONTROL

Selects the control interface, RS-232C or LAN.

 

 

 

 

 

 

LAN RESET

Resets the LAN settings.

 

 

 

 

 

SETTING COPY

In daisy chain condition, set the OSD menu categories which copy from current monitor to

NO

 

 

others. NOTE: When you use this function, EXTERNAL CONTROL should be ÒRS-232CÓ.

 

 

 

This function reset to default when power off. This function has limit up to about 5 monitors.

 

 

 

 

 

 

COPY START

Select ÒYESÓ and press SET button to start copy.

 

 

 

 

 

 

ALL INPUT

When you check this item, copy to all input teminals. Default is off.

 

 

 

 

 

MULTI DISPLAY RESET

Resets ÒMULTI DISPLAYÓ options back to factory settings.

-

 

 

 

 

English

English-23

Image 25
Contents MultiSync P401 MultiSync P461 Advanced Option IndexFCC Information Canadian Department of Communications Compliance StatementEnglish-1 Declaration Important InformationDeclaration of the Manufacturer English-2Cleaning the Cabinet Cleaning the LCD PanelRecommended Use ErgonomicsContents Installation Attach Mounting Accessories Attaching Mounting AccessoriesInstalling and removing optional table top stand Ventilation RequirementsControl Panel Parts Name and FunctionsAmbient Light Sensor DVI in DVI-D Terminal PanelRGB/HV OUT BNC Audio OUTExternal Speaker Terminal Kensington LockOption board slot English-9Keypad Wireless Remote ControlHandling the remote control Operating Range for the Remote ControlDetermine the installation location SetupInstall the remote control batteries Connect the supplied power cordAdjust the sound Switch on the power of all the attached external equipmentAdjust the screen See pages 20 Adjust the image SeeConnections Wiring DiagramBefore making connections English-14Connecting a DVD Player with Hdmi out Connecting a Personal ComputerConnecting a Computer with DisplayPort English-15Basic Operation Power on and OFF ModesEnglish-16 OFFUsing Power Management Power IndicatorSelecting a video source Picture AspectAmbient Mode Picture ModeAmbient parameter setting Information OSDEnglish-19 OSD On-Screen-Display ControlsEnglish-20 English-21 English-22 English-23 English-24 English-25 Recommendations Image Sticking of LCD PanelEnglish-26 Remote Control ID Remote Control FunctionTo SET Remote Control ID To SET/RESET Remote Control ModeEnglish-28 Wired Remote Control FunctionInout English-29 ConnectionNetwork Setting by Using an Http Browser Connecting to a NetworkControlling the LCD monitor via LAN Control OverviewPreparation Before Use Network SettingsHandling of the Address for Operation via a Browser English-31English-32 Alert Mail SettingEnglish-33 FeaturesTroubleshooting Product Specifications Specifications P401English-35 English-36 Specifications P461English-37 Pin AssignmentRXD TXD GNDDisposing of your old NEC product Manufacturer’s Recycling and Energy InformationEnergy Saving Weee Mark European Directive 2002/96/EC
Related manuals
Manual 41 pages 36.85 Kb