Mechanical Specifications
Table 7. Mechanical Specifications
Display External Dimensions | Height | 109.73 (4.32) | ||
millimeters (inches) | w/o mounting tabs | 98.68 | (3.885) | |
Width | 176.78 (6.96) | |||
| ||||
| Depth* | 16.26 | (0.64) | |
|
|
|
| |
DC/DC Converter Dimensions | Height | 19.05 | (0.750) | |
| Width | 50.8 (2.0) | ||
| Length | 133.35 (5.250) | ||
|
|
| ||
Display Weight | 262 grams (0.6 lbs.), nominal |
| ||
|
|
|
| |
DC/DC Converter Weight | 9.33 grams (0.187 lbs.) |
|
| |
|
|
|
| |
Fill Factor | 59.2% nominal |
|
| |
|
|
| ||
Active Area | Width | 67.564 (2.660) | ||
millimeters (inches) | Height | 145.745 (5.738) | ||
Diagonal | 6.33" |
| ||
|
| |||
|
|
|
| |
Pixel Size | Width | 0.203 | (0.008) | |
millimeters (inches) | Height | 0.203 | (0.008) | |
|
|
| ||
Pixel Pitch | Width | 0.264 | (0.0104) | |
millimeters (inches) | Height | 0.264 | (0.0104) | |
|
|
| ||
|
|
|
| |
* Without DC/DC Converter
Component Envelope
The component envelope shown in Figure 5 illustrates the distance components extend behind the display. Tall components do not necessarily fill this area. Planar reserves the right to relocate components within the constraints of the component envelope without prior customer notification. For this reason, Planar advises users to design enclosure components to be outside the component envelope.
An air gap of at least 5 mm is recommended to dissipate heat from display components. Device designers will need to consider their specific system requirements to determine the necessary spacing.
11 |