Mitsubishi Electronics DX-TL5716U instruction manual Copying recorded images

Copying recorded images

You can copy the still image being displayed to a USB memory device or DVD/CD disc as a still or moving image (one-touch copy). This function is convenient to copy recording data for a short period of time.

1 Set a USB memory or a DVD/CD disc in the recorder.

The recorder automatically detects the copy destination device. When both a USB memory device and DVD/CD disc are detected, the DVD/CD disc is used as the copy destination device.

2 Display the image you want to copy in the still image playback mode and the single screen mode.

See page 14 for the single screen mode.

See page 13 for the still image playback mode.

3 Press the COPY button on the front panel to display <Copy menu>.

4	Select the image to be copied from “Moving
	image” or “Still image.”
	“Moving image”: Copies data for the specified recording
	duration starting from the image being displayed.
	“Still image”: Copies 1 GOP including the still image
	being displayed.
5	When “Moving image” is selected in step 4, click
	the time next to “Duration” until the desired copy
	duration appears.
6	Click “Execute copy.”

2

3

?Copy menu

	One touch copy
	Camera		: 1ch
4	Copied data			Moving image	Still image
	Start	: 07-07-2009 13:25:08
5	Duration			5 Min
					Execute copy
6
	Copy starts also by pressing [COPY].
	Other copy				Setting
	Archive				Setting
	E:Exit

You can start copying also by pressing the COPY button on the front panel.

After the completion of copying, check that the COPY indicator goes out before you remove the DVD/CD or USB memory.

Notice

•You cannot perform one-touch copy during copying.

Tips

•When the copy destination DVD/CD disc or USB memory device becomes full during copying, the copying is stopped.

18