Mitsubishi Electronics LT-2220/LT-3020 manual Channel Edit Menu Channel, Memory, Name Selection

CHANNEL EDIT Menu: Channel, Memory, Name Selection

���� ����
������� ���� ����
	� ���
�������
	� �����
������
����	� ����
���	� ����
	���

������ �� ������ ����� �� �������

�� ������ ������ ������ �� ������

Figure 22. Channel

���� ����
������� ���� ����
�������	� ���
	� �����
������
����	� ����
���	� ����
	���

������ �� ������ ����� �� �������

�� ������ ������ ������ �� ������

Figure 23. Memory

���� ����
������� ���� ����
�������	����
������	������
����	�����
���	�����
	���

������ �� ������ ����� �� �������

�� ������ ������ ������ �� ������

Figure 24. Name

Channel

(Figure 22)

Select to edit the channel selections. You can add or delete from memory, name, or add to the SQV (Super Quick View™) list.

After selecting Channel, editing can be done using the Adjust buttons or entering the  digit channel number you want to change (Example  for channel ).

Memory

(Figure 23)

Add weaker channels viewed with ANT and delete unwanted channels, after all available channels have been memorized with Memorize Channels (page ). Use the CH (channel) button on the remote control to view memorized channels.

Name

(Figure 24)

Name channels shown on ANT (up to four characters). After you enter a name, it will appear on the TV screen next to the channel number.

1.Select the memorized channel you want to name.

2.Press ADJUST until you see the

underline highlighted in the Name field.

3.Use ADJUST or to select letters A-Z, numbers 0-9, and/or symbols (!.&’/:*- and blank) for each character of the name you would like for the selected channel. Press ENT after choosing each letter and after the name is complete. If you want to change your selection while on the option field, use CANCEL to delete the current character. You will move one position back. If you press CANCEL while at the first character, the entire name will be deleted.

41

LCD Monitor 5 8 03.indd 41

5/8/2003, 3:03 PM