Mitsubishi Electronics LT-52151 Using the TV with a Personal Computer, Computer Video Adjustments

Page 30

303. Using TV Features

Using the TV with a Personal Computer

Computer Video Adjustments

1.Power on the computer.

2.Select PC from the Activity menu. To do this, press ACTIVITY to open the Activity menu, move the highlight to the PC icon, and press ENTER.

Tip

Set the computer’s screen saver to display a pattern after several minutes of inactivity. This acts as a reminder that the TV is powered on

3.Working from the computer, change the resolution of the computer image. View the computer image on the TV and maximize the computer resolution while maintaining a suitable aspect ratio for the image.

4. Perform TV video adjustments. Press

Computer Display Formats

 

 

MORE then press 8 (VIDEO) repeatedly

Press MORE then press 0 (FORMAT) repeatedly to cycle through the

to access video-adjustment options.

TV displays available for your computer’s video signal.

 

5. Press MORE then press 0 (FORMAT)

 

 

 

 

repeatedly to find the picture format

Computer Signal

As Displayed on TV Screen

(aspect ratio) best suited to the image.

Original Format

4 X 3

16 X 9

Zoom

See the chart on this page showing

Standard

Standard

how different computer resolutions

 

 

 

 

 

 

can be displayed on the TV.

VGA

 

 

 

 

640 X 480

 

 

 

Distortion in Computer Images

WVGA

 

 

 

848 X 480

 

 

 

Computer images may show distor-

 

 

 

 

 

 

 

tion when viewed on the TV, e.g., lines

SVGA

 

 

 

that should be straight may appear

 

 

 

800 X 600

 

 

 

slightly curved.

 

 

 

 

 

 

 

 

WSVGA

 

 

 

 

1064 X 600

 

 

 

Image Resolution

 

 

 

 

Your Mitsubishi TV can display the resolu- tions shown in the chart from standard VGA (640 x 480) through 1920 x 1080 signals at a refresh rate of 60 Hz.

In most cases, the computer will select the best resolution match to display on the TV. You can override this setting if you wish. Refer to your computer operating system’s instructions for information on changing the screen resolution.

You may need to restart the computer for changes to take effect.

Original Format

Standard

Zoom

 

 

 

XGA

1024 X 768

PC 720p 1280 X 720

WXGA 1360 X 768

SXGA

1280 X 1024

Original Format

Standard

PC 1080p 1920 X 1080

Downloaded From TV-Manual.com Manuals

Image 30
Contents Series FCC Declaration of Conformity For Your RecordsContents Replacement Parts Outdoor Antenna GroundingTV Software Installation NotesImportant Information About Your TV If Your TV Gets DamagedSpecial Features of Your TV Package Contents Remote Control BatteriesStand Installation Wall-MountingBefore You Begin First-Time Power-OnHome Fast Power On Retail Welcome screenRemote Control TV ControlsTV Control Panel Power IndicatorSystem Reset IR SensorChannel Scan for Digital Channels Setting Up TV InputsSetting Up Other Inputs Memorizing Channels with Channel Scan For the ANT inputAbout Auto Input Sensing Auto Output Sensing Watching Broadcast TV CancelBasic TV Operation Watching DVDs or VideosOther TV Features Making Picture AdjustmentsAudio Settings Other InformationConnection Types Cable ManagementAuto Input/Auto Output Sensing Picture QualityConnector Panels Inputs and OutputsPb Pr Component Video ANT AntennaHdmi Inputs High-Definition Multimedia Interface Video Composite VideoIR-NetCommand Output/External Controller Input USBRS-232C LAN USBa, USBb Hdtv Cable Box, Satellite Receiver, DVD/ Blu-ray Player Pb Pr Component Video DeviceHdmi Device Suitable for use with Sound Projector surround soundComposite Video Device Antenna or Cable TV ServiceDVI Video Device Cable Box, Satellite Receiver, DVD PlayerVCR or DVD Recorder to an Antenna or Wall Outlet CableReceiver Receiver with Hdmi OutputDVD player Subwoofer Audio-Only DeviceSleep Timer Selecting an InputSleep Controlling A/V Receiver Volume ChannelView Channel ListingsRedirecting Audio Output Standard-Definition Analog Channels Status Display About Channel Numbers Standard-Definition Digital ChannelsDVD Image Definitions TV Signals and Display FormatsSignal Definitions TV Display Format DefinitionsComputer Video Connection Audio Video Output Connecting a Computer to the TVThis TV accepts digital computer signals only Digital DVIImage Resolution Using the TV with a Personal ComputerComputer Video Adjustments Computer Display FormatsPlaying a Slide Show or Playlist Camera Images and Music FilesUSB Media Player Menu Displaying the MenuThumbnail and Playlist Menus USB Media Setup Menu Picture Files Compatible with the USB PortSlideshow + Music --Slideshow Music only Photos and Moving Video As Composite Video Press ACTIVITY, select Watch Movie Cam, and press EnterSound Projector Technology Basic SetupSound Projector Before You BeginAdjusting an External Subwoofer Adjusting Beam AnglesAdjusting Levels Custom menuStart Auto Setup Press Menu and go to Initial SoundPro Auto SetupMicrophone Placement Initial PreparationStreaming Internet Movies with Vudu Vudu Wireless KitInfo & Settings menu Standard ConnectionTroubleshooting Getting StartedSource device connected directly to the TV Introduction to Home-Theater ControlMain Menu Menu NavigationAdjust From the Adjust Picture menuFrom the Adjust Audio menu SAP Audio Listen To StereoMono LanguageEnter twice ResetFilm Mode Auto, Off Advanced Picture GlobalADV2 Captions Captions on Analog ChannelsCaptions on Digital Channels Initial DSTChannel Ant Air Adding/Deleting Channels Using the Channel Edit MenuEnergy Energy Usage Standard Fast Power Ant CableStart Inputs AVRPhotos Music How is the Activity Menu Generated?Inputs Activity menu DVD DVD2 DVRLock Parental Unlock Time Lock by TimeLock Time PanelAbout NetCommand IR Control Important Note on NetCommandIR Emitter Placement Power keyIf You are Unable to Locate a Device’s IR Sensor Initial NetCommand Setup Adding or Removing Device Keys from NetCommand ControlIf the device has no Power OFF key, skip this step Controlling Most Device Types Operating NetCommand-Controlled DevicesSpecial Operation Description and Setup How to Use Special Operation MethodsMore Key Menu and NetCommand SP/EPNetCommand Specialized Device Keys Controlling Other A/V Receiver Functions Switching Audio to and from the A/V ReceiverControlling A/V Receiver Power With Any Connection TypeSetup to Control A/V Receiver Power and Volume Setting Up A/V Receiver ControlPower and Volume Before You BeginAutomatic Switching Audio or Audio/Video Use this setup forDVD Input key Case 3 Automatic Audio Video Switching via Hdmi More About Using an Hdmi ConnectionBefore You Begin NetCommand and press Enter Open the Inputs Learn menuAppendices More Menus Appendix a Programming the Remote ControlFunctions Available for Other A/V Devices Series Supplemental KeysDVD Programming the Remote ControlAudio Lock Universal A/V Receiver Control CABLE/SAT VCR DVD AudioProgramming Codes Audio AmplifiersCable Boxes Satellite Receivers VCRsGFM SVA DVD and Blu-ray PlayersIRT Enabling Hdmi Control of CEC Devices 249 Series. Use the TV’s NetCommand IR controlAppendix B Hdmi Control of CEC Devices New Device Found screenHdmi Control of an Hdmi A/V Receiver and Connected Devices Device Found screen will appearUsing Hdmi Control Resolving CEC ConflictsCleaning Recommendations Care of the Remote ControlAppendix C TV Care Mitsubishi Unisen LCD Hdtv Bypassing the Parental LockThis page intentionally left blank Service and Customer Support Appendix E TroubleshootingTV Reset Comparison Guide ServiceRead the ON-SCREEN Nels, see Initial ChannelIf the New Device TionsPassword Series Reset ParentalAccount TV Channels Symptom Remarks TV Power On/Off Symptom RemarksPicture Symptom Remarks Sound Symptom RemarksReceiver Set Up for Audio and Video Switching over Receiver with Hdmi ControlAppendices87 Trademark and License Information Mitsubishi TV Software GNU General Public License No Warranty To Obtain Warranty Service This Limited Warranty does not CoverWarranty93 Index Index95 MDEAservice@mdea.com System Reset
Related manuals
Manual 94 pages 33.75 Kb