Mitsubishi Electronics WD-65735, WD-65835, WD-60735 manual 46 5. TV Menus, Inputs Menu Options

465. TV Menus

Setup Menu, continued

Setup menu, Energy options

Setup Menu Options

5. TV Menus 47

Inputs Menu

Note:

When you change an input name in the Name menu and then exit the Name menu:

The name is changed

The icon in the Input Selection menu is changed

Audio and video settings are changed to the defaults for the new device type.

All previous NetCommand “learning” for the input is erased.

Change input names using the Inputs > Name menu.

Inputs Menu Options

Energy	Fast Power On	Use the Energy Mode option to select the level of power consumption
Mode		while the TV is turned off.
Energy		The default setting is Fast Power On.
	Low Power	Low Power uses less energy, but TV power-on takes longer and
		some TV features may be unavailable.

Keep Energy Mode set to Fast Power On if you need to:

• Have faster power on.
•	Receive updates to ChannelView channel listings.
•	Keep the TV Clock accurate for the TV Timer. With the Low Power setting, you must reset the TV

Cable Box, Camcorder, CD/

Audio, DVD (DVD, DVD2, Blu-Ray, Name HD DVD), DVR, Game (Game,

PS, Xbox, Wii), MP3 Player, PC, Satellite, VCR, AVR

On/Off (Ant 1 and ANT 2 only)

Off (HDMI only)

Control Enable, Control Disable

(CEC-enabled devices only)

•Lets you assign or change names of inputs appearing in the Input Selection menu.

•Lets you turn Ant-1and Ant-2 On/Off (to display/hide in Input Selection menu).

•Lets you turn unused HDMI inputs Off (to remove from Input Selection menu).

•Press to move between inputs.

•Press to select a name.

•If you change the name of an input after performing NetCommand “learning,” the IR codes you “learned” are erased.

Clock if the TV is left turned off for over 48 hours.

	Lamp	Standard	Standard is for most viewing conditions and may extend lamp life by
	Mode		using lower wattage. Use Bright in brightly lit rooms.
		Bright
	3D	On, Off	Use the On setting for video games and movies that require 3-D glasses.
	Mode
3D Mode
	Glasses	Standard,	Synchronizes the 3D glasses with the image on screen to provide the best
	L-R	Reverse	3D effect. Standard is the default; try Reverse if this seems incorrect.

Note: 3D options are available only for 1080p 60 Hz video sources connected to an HDMI input.

Notes for HDMI devices

•Disconnecting an HDMI device: When you disconnect an HDMI device, the icon remains in the Input Selection menu until you remove it. To remove an unwanted HDMI icon, select Off for the HDMI input.

•Disabling TV’s use of CEC: CEC-enabled devices appear in the Inputs > Name menu with an option to turn off the TV’s CEC signals to the device. You may want to disable the TV’s CEC signals if control conflicts occur. The default

setting is Control Enable. Press to highlight Control Disable to turn off TV CEC for the device. To enable or disable the device’s response to CEC signals, see the device’s owner’s manual.

•Names of CEC-enabled devices: CEC-enabled devices send their own predefined name to the TV. You cannot change the name of CEC-enabled devices.

	Lets you put frequently used icons at the start of the Input Selection menu.
Order	1.	Press	to highlight the icon to move.
	2.	Press ENTER to confirm the selection.

3.Press to drag the icon to the desired position.

4.Press ENTER to set the new position.

	736 and 835 series models
Learn	• Select Learn to perform initial set-up of NetCommand control of the current viewing device.
	• Lets you add or remove individual keys from NetCommand control of a device.
	See detailed instructions in chapter 6, “NetCommand IR Control.”
	736 and 835 series models
	Sets up NetCommand control of an A/V receiver. This set-up allows you to:
AV Receiver	• Operate the A/V receiver’s power and volume functions with the TV’s remote control.
	• Automatically switch an A/V receiver to the correct audio input when a device is selected in
	the Input Selection menu.
	• Automatically switch an A/V receiver with an HDMI output to the correct audio and video inputs
	when a device is selected in the Input Selection menu.
	See detailed instructions in chapter 6, “NetCommand IR Control,” starting on page 57.

Downloaded from www.Manualslib.com manuals search engine