Mitsubishi Electronics WD-52527, WD-60C8, WD-65C8, WD-73C8 specifications Introduction

MODELS: WD-60735 / WD-60C8 / WD-65735 / WD-65736 / WD-65835 / WD-65C8 / WD-73735 /

WD-73736 / WD-73835 / WD-73C8

INTRODUCTION

This service manual provides service instructions for the V39, V39-, V39+ and V39++ chassis types. The specific models for each chassis type, dimensions and weight are listed below. Service personnel should read this manual thoroughly before servicing these chassis.

DLP Models DIMENSIONS

MODEL	CHASSIS	WIDTH	HEIGHT	DEPTH	WEIGHT	POWER
						USAGE
WD-60735	V39	53.9 in	36.7 in	14.4 in	64.4 lbs	240W
WD-60C8	V39-	"	"	"	"	"
WD-65735	V39	58.2 in	39.5 in	15.3 in	72.2 lbs	270W
WD-65736	V39+	"	"	"	"	"
WD-65835	V39++	"	"	"	"	"
WD-65C8	V39-	"	"	"	"	"
WD-73735	V39	65.2 in	43.6 in	17.5 in	93 lbs	"
WD-73736	V39+	"	"	"	"	"
WD-73835	V39++	"	"	"	95.2 lbs	"
WD-73C8	V39-	"	"	"	"	"

This service manual includes:

1.Assembly and disassembly instructions for cabinet and chassis components.

2.Servicing of the Lenticular Screen and Fresnel Lens.

3.Servicing printed circuit boards (PCBs).

4.Electrical and Mechanical adjustments.

6.Chip parts replacement procedures.

7.Circuit path diagrams.

The parts list section of this service manual includes:

1.Cabinet and screen parts.

2.Electrical parts.

Schematic and block diagrams of the above listed models are included in this service manual for better understanding of the circuitry.

PRODUCT SAFETY NOTICE

Many electrical and mechanical parts in television receivers have special safety related characteristics. These charac- teristics are often not evident from visual inspection nor can the protection afforded by them necessarily be obtained by using replacement components rated for higher voltage, wattage, etc.

Replacement parts which have special safety characteristics are identified in this service manual.

Electrical components having such features are identified by shading on the schematic diagram and parts list of this service manual. Therefore, the replacement for any safety part should be identical in value and characteris- tics.

Pb Solder	The PWBs used in the V39, V39+. V39++ and V39- chassis are constructed using Lead-Free
	solder. When servicing use only recommended Lead-Free solder (refer to page 33).

Page 5