Wall Mount Configuration Setup
CAUTION
•Mitsubishi recommends that only qualified service personnel mount the LCD display. Customers should not attempt to do the work themselves. Mitsubishi bears no responsibility for improper mounting or mounting that results in an accident or injury.
•Carefully read the installation instructions that come with the wall mount before starting installation.
1.Before performing work make sure to disconnect the AC Power cord from the 42" LCD Display.
2.Before performing work spread the protective sheet, which was wrapped around the display, on a flat, even surface. This will prevent the display from being damaged.
3. Gently lay the LCD Display face down on the protective sheet.
4. Do not touch or hold the screen face while carrying the display.
5. Remove the screws indicated by the arrows. Remove the stand cover.
����������������
23