Mitsubishi Electronics L423FR, LT-4260 manual Recommended

Connecting a Satellite Receiver/Cable Box Directly to LCD Side Panel

NOTE: The LCD Display side panel connections shown below can only be used when the HD-6000 is not connected to the LCD Display.

See Appendix A, page 61 for component video signal compatibility information.

For digital audio connections, see your DTV receiver and A/V receiver Owner’s Guides.

Satellite Receiver/Cable Box with Component Video Connections

(Recommended)

(Figure 6)

1.Connect RCA-type cables from the Satellite receiver/Cable Box outputs to the LCD Display side panel. Component VIDEO INPUT may be used for 480i, 480p, 720p or 1080i components.

2.Connect the L (left) and R (right) audio cables from the Satellite/Cable Box receiver to

COMPONENT VIDEO INPUT/AUDIO RIGHT & AUDIO LEFT on the LCD Display side panel.

3.To utilize the benefits of a digital A/V receiver, connect your Satellite/Cable Box receiver’s digital audio out to a digital input on your digital A/V receiver.

See your Satellite/Cable Box receiver and A/V receiver Owner's Guides for instructions.

����������������������

��� �

����� �

�

�

�

�����������������������������������������������������

						�������
						������������������������
	�����	�����		�����		�����������
�	�	�	�	�
				�������	���������
				�
�				�	����
	��	�	�		����
	��				�������
				���	���������
�	��
	������	������
���������� ������				�������	�����������	������������

Figure 6. Connecting a Satellite receiver with component Video Connections.

32