1. Basic Setup and Operation | 13 |
TV Controls, continued
TV Control Panel
Buttons on the control panel duplicate some keys on the remote control.
•To display the main menu, press INPUT and VOL+
simultaneously for about 10 seconds. Press and hold INPUT and VOL+ for 10 seconds to clear the menu.
•Refer to left labels when no TV menus are dis- played.
•Refer to right labels when using TV menus or after activating a special function.
POWER
INPUT
ENTER
CH
VOL
TV control panel
System Reset
If the TV fails to respond to the remote control, the
To perform System Reset, press and hold the POWER button on the control panel for 10 seconds.
Panel-Lock Release
•To release the Panel Lock using the TV control panel, press and hold the INPUT button on the control panel for ten seconds. If the TV is off, press the POWER button to make it power on.
•To activate the Panel Lock, use the Lock menu, page 59.
POWER Indicator
POWER |
Key
Off
Steady On
Slow Blinking
Fast Blinking
LED Color | TV Condition | |
|
| |
None | TV is powered off. Normal operation. | |
| ||
|
| |
Green | TV is powered on. Normal operation. | |
| ||
|
| |
Green | TV powered off, | |
Normal operation. TV can be turned on at any time. | ||
| ||
|
| |
Red/ | TV may require service. | |
• Hold power button on front panel for 10 seconds to reset TV. | ||
Yellow | ||
| • If LED continues to flash red and yellow after reset, turn off the | |
| TV and unplug it from the AC power source. Wait one minute | |
| and then plug the set back in. | |
| • If LED continues to flash red and yellow, go to | |
| ||
| rized Service Center information. | |
| You may be asked to count how many times the LED flashes | |
| each color to assist in troubleshooting. | |
|
|
Downloaded From
For assistance call 1(800)