Planar 40 manual Monitor Specifications, PC Input, Video Input, Physical

Page 58

Specifications

Monitor Specifications

LCD

Liquid Crystal Panel	TFT
Display Size	39.6''
Pixel Configuration	1,280 x 768
Pixel Pitch	0.6735 x 0.6735 mm
Brightness	420 cd/m2 typ.
Response Time	22 ms
Contrast	600 : 1 typ.
Angle of Visibility	Up 85, Down 85, Right 85, Left 85 degrees
	(contrast ratio of less than 10)

PC Input

Vertical signal	56 - 75 Hz
Horizontal signal	31.4 - 60.2 kHz
Video Signal	Analog: RGB 75Ω 0.7Vp-p Digital: DVI Standard Version 1.0
No. of Colors	16.77 million
OSD Language	English, German, Japanese, French, Spanish
Plug & Play	VESA DDC2B
Power Management	VESA DPMS

Video Input

Composite Video	Signal	75 Ω, 1Vp-p (NTSC, PAL, SECAM)
	Connector	BNC x 1
S-Video	Signal	Luminance : 75 Ω 1Vp-p
		Chrominance : 75 Ω 0.286Vp-p (NTSC, PAL SECAM)
	Connector	Mini DIN 4pin X1
Component Video	Signal	Y/Cb/Cr, Analog RGB+C SYNC, Analog RGB+HD/VD

	Connector	BNC x 5

Physical

Dimensions	941 (W) x 601 (H) x 120 (D) mm
Weight	28.6 kg
Operating Conditions	Temperature:		Operating: 5¡C to 35¡C	Storage: -20¡C to +60¡C
	Humidity:	30% to 85% RH (no condensation)
Power Supply	Input:	AC 120V(North America)		AC 220-240V(Europe)
	Output:	Available to cascade
Power Consumption	260 W (28 W in Energy Saving mode)

Note : To improve this LCD monitorÕs performance level, its specifications and appearance are subject to change without notice.

57

Image 58

Contents Planar 40 LCD Manual Table of contents Placement precautions PrecautionsHandling precautions Before First Use Check AccessoriesNames and Functions Front ViewRear View AC-OUTOuter Dimension External Control Installation Connect the ComputersConnect the Video deck, DVD player etc Component Video Terminal How to secure the monitor on a wall Side view of the monitor Rear view of the monitorAdjusting the Screen LCD Monitor InstructionsAdjustment Items Pippicture in picture Menu refer toVideo Menu Mode Change or indicate the input signalWhile displaying the current mode, press the button again Display the Windows or other screen Adjustment ProcedureBefore Adjustment Display the OSD On Screen Display MenuSelect the item to be adjusted on the Sub Menu Select the item to be adjusted on the Main MenuAdjustment or Setting Adjust the brightness Adjustment Procedure Picture MenuManual Adjustment Adjust the contrastAdjust the horizontal position Analog mode only Adjustment for computer screenSelect contrast on the Sub menu and press the Enter button Adjust the phase Analog mode only Adjust the vertical position Analog mode onlySelect phase on the Sub menu and press the Enter button Select frequency on the Sub menu and press the Enter button Adjust the scalingUse the and button to adjust Select scaling on the Sub menu and press the Enter buttonAdvanced Menu Adjust the color temperature PresetUse the and/or button to adjust Select advanced on the Main menu and press the Enter buttonAdjust the color temperature User Advanced MenuAdjust the size Adjustment Procedure Advanced MenuPicture in picture Menu Use the and/or button to select the size Pip MenuSelect the position Select pos on the Sub menu and press the Enter buttonAdjust the brightness Video signal only Adjustment Procedure Pip MenuChange the input signal Select source on the Sub menu and press the Enter buttonAdjust the contrast Video signal only Adjust the color Video signal only Adjust the tint Ntsc signal onlySelect tint on the Sub menu and press the Enter button Adjust the sharpness Video signal onlySelect sharpness on the Sub menu and press the Enter button Adjust the vertical position Adjustment Procedure Adv pip MenuAdjust the horizontal position Advanced picture in picture MenuSelect the video format Use the and/or button to select the video formatSelect the osd position Adjustment Procedure Options MenuOptions Menu Select language used in OSD On Screen DisplaySelect language on the Sub menu and press the Enter button Automatic Adjustment Analog mode onlyPress the button to start the Automatic Adjustment Use the and/or button to select the languageDisplay the resolution Display the osd versionUtilities Menu Change the osd timeoutUse the and/or button to adjust. Interval 5~60 Utilities MenuSelect reset on the Sub menu and press the Enter button Adjustment Procedure Utilities MenuDelete the data saved at the current display mode Press the button to reset the osd settingPicture Menu Sharpness 6 7 Scaling Wide Adjust the color Adjust the tint Ntsc signal only Use the and/or button to adjust. Interval 1~8 LB stands for Letter Box Main menu Adjust the color temperature User Select user red with the button and press the Enter buttonVideo Menu Video MenuSelect video on the Main menu and press the Enter button Picture Language Advanced Display the osd version Picture Osd background Opaque Osd timeout Seconds Picture Osd background opaque Display the Shortcut Menu Additional FunctionsShortcut Menu Use the Enter button to select the shortcut menuUse the Enter button to select contrast menu Use the Enter button to select pip enable menuSelect the size of pip picture in picture Use the and/or button to select the size of pipPower Management System Plug and PlayMaintenance Display ScreenFault Finding Fault FindingTroubleshooting Screen Display Table of Preset Data SpecificationsCable Pin Arrangement Analog Video Input mini D-Sub 15pinVideo Input Monitor SpecificationsPC Input PhysicalFederal Communications Commission FCC Statement Planar Systems, Inc