JVC manual JVC VR-616

JVC VR-616

(10)Press right button, and move the specific block.

(11)Press display button, and a yellow bar will be displayed on the left-hand side of a specific block.

00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23

１

(12)Once again, press display button, and a yellow bar will be displayed on the right- hand side of 23 (23:59).

(13)Press left button, and move it to the position of 18. Press display button, and a yellow bar will disappear.

00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23

１

(14)By the above procedure, schedule setup has completed. Moreover, this state seems that one day is divided into five blocks. If a block is chosen with a right/left button and an ENTER button is pressed at it, a record setup of each block can be set-up freely. However, mind that a boundary line will disappear if an adjacent block is set to the same setup.

●If press the ENTER button as block is selected, the below picture (Recording Events) will be displayed then possible to set-up recording option for selected channel.

●The way of setup is the same with Manual Recording.

●After finish setup, press the EXIT button then it is returned to Manual Recording menu.

!Please do not set-up a channel without video input as record. Please remove all checks such as Always, Alarm, and Motion.

●As press the ENTER button at the QL, possible to set-up Recording Quality like above picture.

●Set-up range : 1 ~ 7. (Default setting : 5) (1=Low, 7=the Highest.)

●After finish setup QL and each channel, press the EXIT button for out of menu.

-- 53 --