JVC VR-616 manual Jog Direction Axis Direction Button, Sensitivity

JVC VR-616

●How to Setup

ⓐJog direction of field setup.

Jog Direction

X-axis Direction Button

Y-axis Direction Button

ⓑThe user field setup is moved to the place by jogging. The first location and the last location can be selected by clicking ENTER.

ⓒArea field setup is moved to the place by jogging and can check the field by using ENTER.

ⓓAfter setup is finished, move to the higher level menu by clicking EXIT.

●Sensitivity

Sensitivity refers to the sensitivity to motion. Sensing Speed is the speed of motion. Possible to set-up a range from 1 to 10. (1=Low/Slow, 10=High/Fast.)

Motion must be clicked on Recording Events. After detecting motion by Motion Area, Sensitivity and Sensing Speed, recording is started.

How to Setup

ⓐMove to Sensitivity or Sensing Speed by using Jog then press the enter button for setup value.

ⓑAfter setup is finished, move to the previous menu by clicking EXIT.

!Sensitivity is detected sensitive changing in proportion to value. Sensing Speed is no reaction to fast changing because renewal speed is slow down as increasing Sensing Speed value. If a setup is completed, please be sure to check real operation.

!When an area setting screen is opened during recording, even if there is no motion in an image. Although the detection log may be recorded, the Motion-Detection Recording does not work.

-- 58 --