MAX® 4300-PM BACK PANEL FEATURES
1. Circuit Breaker: | 2. Outlet Bank 2 | 3. Outlet Bank 1 | |||
Automatically opens | Four switched, | Four switched outlets with linear filtration technol- | |||
when the current load | the front panel Power Button. | ogy (LiFT) controlled by the front panel Power | |||
is greater than 15 | The High Current outlet provides power from a low | Button. | |||
Amps. Push to reset. | impedance noise filtration circuit that does not limit | LiFT EMI/RFI noise filtration is provided by a two- | |||
|
| the current to your equipment. Its output is noise | stage tapped Pi filter circuit which also provides | ||
|
| isolated from Outlet Bank 1. | noise isolation from all four outlets in Bank 2. | ||
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
4. LAN Jacks
Protection circuits for 10/100 baseT Ethernet lines. Incoming LAN line MUST be plugged into the LINE jack. Patch cord to the equipment MUST be plugged into the EQUIP jacks. 8 wire protection, 50V clamping.
5.Universal TV Coaxial Jacks
2pairs of bidirectional protection circuits optimized for satellite, cable, and antenna TV signal lines.
6. Main Power
Must be plugged into a properly wired & grounded
7. Ground Lug:
Provides a common grounding point for equipment with separate ground leads
8. Phone Jacks
Protection circuits for standard telephone or
MAX® 4300-PM SPECIFICATIONS
General________________________________________________________________
Dimensions | 17 in. W x 7.75 in. D x 1.75 in H, (2.125 in. Including feet) | |
Weight | 6.5 lbs. | |
AC Power_______________________________________________________________ | ||
Line Voltage | 120V, 60Hz | |
Total Current Capacity | 15 A | |
UL1449 Suppression Rating | 330V | |
Protection Modes | ||
Initial Clamping Level | 200V | |
Energy Dissipation | 1650 Joules | |
Peak Impulse Current | 65,000 Amps | |
Catastrophic Surge Circuit | Yes | |
Thermal Fusing: | Yes | |
142 VAC ± 5 VAC | ||
90 VAC ± 2 VAC | ||
EMI/RFI Noise Filtration___________________________________________________ | ||
Bank 1, Linear Filtration Switched Outlets | .......................................60 db, 100 KHz – 2 MHz | |
Bank 2, High Current Switched Outlets | 49 db, 100 KHz – 2 MHz | |
LAN Circuits_____________________________________________________________ | ||
Clamping Level | 50V | |
Jacks | ||
Wires Protected: |
USB Circuit_____________________________________________________________
Jacks | USB |
Power Delivery | 5 x 100 mA |
Telephone Circuit________________________________________________________ | |
Yes | |
Clamping Level | 260V |
Capacitance | 30pf (approx.) |
Suppression Modes | Metallic & Longitudinal |
Connections | |
Lines Protected | |
Cable and Satellite TV Circuits______________________________________________ | |
HD Ready | Yes |
Bidirectional | Yes |
Shielded | Yes |
Clamping Level | 75V |
Frequency Range | 0MHz - 2.2 GHz |
Insertion Loss | < 0.5 dB |
Connections | Female “F”, Gold Plated |
Specifications are subject to change due to product upgrades and improvements.
UPC’S, QUANTITIES, WEIGHTS & MEASUREMENTS FOR ORDERING & SHIPPING
MODEL |
|
| UNIT CARTON |
|
|
|
| MASTER CARTON |
| ||||
17” x 7.75” x 1.75” |
| 6.5 lbs | 19.5” x 12” x 4.625” |
| 8 Lbs |
| 0 50616 00818 1 | 2 |
| 20” x 12.75” x 10.75” |
| 17.5 Lbs |
|
|
|
|
|
|
| ||||||||
2.125” H with feet |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1690 Corporate Circle, Petaluma, CA. 94954
© 2007 Panamax, Inc. Panamax, MAX, and the Panamax logo are registered US trademarks of Panamax
5 00 50616 00818 6
L586 REV A 5/07