JVC XV-S60 manual Lt/Rt, Mode, L0/R0, When the unit is stopped for More than 30 minutes or

Page 49
SELECT KEY
Lo/Ro
ON
OFF
MODE 1
DVD1
DIGITAL AUDIO OUTPUT DOWN MIX COMPRESSION AUTO STANDBY SCREEN SAVER
AV COMPULINK MODE
STREAM/PCM
PREFERENCE1 PREFERENCE2

DOWN MIX

To playback a DVD VIDEO disc recorded with surround multichannel audio correctly, the DOWN MIX setting must be properly made according to

 

Initial settings

SCREEN SAVER

 

 

 

English

 

 

 

A television monitor screen may be burned out if a static picture is displayed for a long time. To prevent this, the unit automatically activates the screen saver function if a static picture, such as an on-screen display or menu, is displayed for over 5 minutes.

your audio system.

Note that this setting affects

only the output signal from the ANALOG AUDIO output jacks when playing back a DVD VIDEO disc recorded with surround multichannel audio.

• Lt/Rt

Should be selected when you enjoy multichannel

surround audio by connecting the unit’s ANALOG

•MODE 1

The current picture gets dark.

•MODE 2

The “screen saver” picture appears and its brightness changes.

PREFERENCE1

PREFERENCE2

DIGITAL AUDIO OUTPUT

STREAM/PCM

DOWN MIX

 

Lo/Ro

COMPRESSION

ON

AUTO STANDBY

OFF

SCREEN SAVER

MODE 1

AV COMPULINK MODE

DVD1

SELECT

KEY

 

AUDIO output to a surround decoder.

• L0/R0

Should be selected when you enjoy conventional 2-

channel stereo audio by connecting the unit’s AUDIO

output to a stereo amplifier/receiver or television set,

or when you duplicate audio of a DVD VIDEO disc

recorded with surround audio to your MD, cassette,

etc.

•OFF

The screen saver function is off.

NOTE

•The monitor screen of a projector or projection TV is easily burned out if the screen saver mode is set to OFF and a static picture is displayed for a long time.

AV COMPULINK MODE

NOTE

•The Down mix function does not work when the 3D PHONIC function is activated.

If you use the AV COMPU LINK system, you must set this item correctly.

Select from the three options: “DVD1”, “DVD2” and “DVD3”

PREFERENCE1

PREFERENCE2

DIGITAL AUDIO OUTPUT

STREAM/PCM

DOWN MIX

 

Lo/Ro

COMPRESSION

ON

AUTO STANDBY

OFF

SCREEN SAVER

MODE 1

AV COMPULINK MODE

DVD1

COMPRESSION

The compression function suppresses the dynamic range of 2-channel audio output signals. This function is always active when playing back a 5.1-channel source.

PREFERENCE1

PREFERENCE2

DIGITAL AUDIO OUTPUT

STREAM/PCM

DOWN MIX

 

Lo/Ro

COMPRESSION

ON

AUTO STANDBY

OFF

SCREEN SAVER

MODE 1

AV COMPULINK MODE

DVD 1

SELECT

KEY

 

according to the equipment to be connected.

See page 51.

SELECT

KEY

•ON

The compression function is always active regardless of sources.

•OFF

The compression function is inactive when playing back a one- or two-channel source.

AUTO STANDBY

 

 

 

When the unit is stopped for

 

 

 

more than 30 minutes or 60

PREFERENCE1

PREFERENCE2

DIGITAL AUDIO OUTPUT

STREAM/PCM

minutes, the unit enters standby

DOWN MIX

 

Lo/Ro

mode automatically.

COMPRESSION

ON

SCREEN SAVER

MODE 1

 

 

AUTO STANDBY

OFF

 

 

AV COMPULINK MODE

DVD1

 

 

SELECT

KEY

 

•

60

 

 

 

 

Time is set to 60 minutes.

 

 

 

•

30

 

 

 

 

Time is set to 30 minutes.

 

 

 

•

OFF

 

 

 

 

The auto standby function is off.

 

 

Initial settings

47

Page 48 Page 50
Image 49
Page 48 Page 50
Contents 96% Mises en garde, précautions et indications diverses Table of Contents Supplied accessories FeaturesIntroduction To playback in random order Random Important cautions Safety precautionsNames of parts and controls Preliminary knowledgeFront panel Remote control unit TV/VIDEO Cancel button 19 Infrared signal-emitting windowPrevious button 23, 26 Clear button 22, 24, 31AC in connector AV Compu Link jacks Multi-information window PROGRAM/RANDAM indicatorsDisplay window Rear panelOn-screen displays Operational PrinciplesBasic operations of on-screen displays Opening displayParental Lock display see Preference 1, 2 displays seeDVD Video Control display CD Control displayVCD Control display To prevent the monitor from burning out Screen SaverMP3 Control display See To bring up the VCD Control displayOn-screen guide icons How to use numeric buttonsPlayable disc types About discsDisc structure Playable discsConnections Getting startedBefore making any connections To connect to a conventional TVTo connect to a TV with the component video input jacks How to make the Progressive scan mode activeBlue GreenTo connect to an audio amplifier or receiver About Scan ModeRed White Audio cable Not supplied Amplifier or receiver To connect to audio equipment with a digital input To connect the power cordAudio cable Red To install batteries in the remote control unit Using the remote control unitPrecautions for the safe use of batteries PrecautionSetting the remote control signal for operating your TV To use the remote control unit for TV operationYou can operate your TV from the remote control unit Manufacturer code list+10 Turning on/off the unit Basic operationsInserting and removing discs Press 0 OPEN/CLOSE to close the disc trayTo start playback Basic playbackTo stop playback completely To stop playback temporarilyTo advance or reverse playback rapidly while monitoring Method 1 from the remote control unit onlyTo locate the beginning of the scene or song MethodTo memorize the interrupted position Resuming playbackTo resume playback Unit memorizes the interrupted positionTo locate a desired scene from the DVD menu Advanced operationsPress Title or Menu ExampleUse the numeric buttons to specify the number Unit status Disc type What is SpecifiedFor DVD VIDEO/Audio CD During playback or while stopped Use Cursor 5/∞ to move to Time SEARCH, then press Enter Press on ScreenMessage area Use the numeric buttons 0 to 9 to enter the time To locate a desired scene from the display DigestPress Enter Press DigestTo display continuous still pictures Strobe Special picture playbackUse Cursor 5/∞/2/3 to select the desired scene Press and hold 8 for more than 1 secondTo zoom in/out Zoom To playback in slow-motion SlowPress 8, then use 1/¡ Press Zoom + orTo playback in the desired order Program Changing the playback orderUse Cursor 5/∞ to move to Program and press Enter Press 3 to start program playTo playback in random order Random Repeat playbackTo repeat the current selection or all tracks Repeat Use Cursor 5/∞ to move to RandomAudio CD/Video CD Use Cursor 5/∞ to move to REPEAT, then press EnterUse Cursor 5/∞ to move to A-B To repeat a desired part A-B RepeatPart you want to repeat point a To repeat point BTo select a scene angle from the normal screen Angle Selecting a scene angleFrom normal screen From on-screen displayTo select a scene angle from the angle list display Angle Changing the language and soundTo select the subtitle language Subtitle Use Cursor 5/∞ or Subtitle to move to Subtitle To change the audio language or sound English AudioUse Cursor 2/3 or Subtitle to select the desired subtitle Press AudioPress VFP Progressive Scan to select the desired preset To adjust the picture character VFPMiscellaneous functions Use Cursor 5/∞ or Audio to move to AudioPress Cursor 2/3 to adjust the effect level Adjust the level of the parameter using Cursor 2/3To simulate surround sound 3D Phonic Press 3D PhonicUse Cursor 5/∞ to move to Time Select Changing the brightness of the display windowPress Cursor 5 or ∞ while holding down While stopped Each Elapsed time of the current trackMP3 disc playback What is MP3?About MP3 disc OperationsHighlight a desired Track using Cursor Highlight a desired Group using Cursor Press Enter orSpecifying the desired Group and Track Press Enter orYou can repeat playback of the current track or group Repeat playbacksTo stop repeat playback Press To quit repeeat playback How to set preferences Initial settingsSelecting preferences Language and display preferenceWhich show what is Setting changes as followsLB Letter Box Conversion 43 PSAudio and system preference Mode automatically When the unit is stopped for More than 30 minutes orLt/Rt ModeEnter your 4-digit password using the numeric buttons 0 to Press Enter while holding down 7 on the remote control unitLimiting playback by children To set Parental Lock for the first timePoints Password To change the settings Parental LockScreen display appears On the TV screenUse the Cursor 5/∞ to move to YES, then press Enter To temporarily release the Parental lock Parental LockConnection and setup AV Compu Link remote control systemAdditional information To AV Compu Link II or EX DVD playerYou connect the component video output to your TV OperationMaintenance of discs How to handle discsCare and handling of discs Label sideSymptom Possible case Remedy TroubleshootingSpecifications Appendix ATable of languages and their abbreviations Appendix BCountry code list for parental lock EN. FR JVC 0501AOMDTEJSC
Top Page Image Contents