Regent Sheffield HT- 5OO manual Tips for connecting the speaker wires

SPEAKER SYSTEM CONNECTIONS

Tips for connecting the speaker wires

Push and hold the Speaker terminal tab down to insert each wire. Release the tab to lock the wire into the terminal. Make sure the wire is fully inserted, but the insulation is not covering the inserted part of the speaker wires.

To avoid short-circuiting the speakers

•Make sure the stripped end of each speaker wire does not touch another speaker terminal or the stripped end of another speaker wire.

Examples of poor connection of the speaker wires

• Stripped speaker wire is touching another speaker terminal. Make sure not even 1 strand of wire touches the other wire!

• Stripped wires are touching each other due to excessive removal of insulation. Do not allow the above to happen on your set or speakers.

NOTE:

Be sure to match the speaker wire to the appropriate terminal on the components: (+) to (+) (color), and (-) to (-) (black). If the wires are reversed, the sound will be distorted and will lack some tones. Follow the color codes of each speaker.

6 IB-HT500-WM-E-080202