HOOKUPS
CONNECTING TO A TV
AUDIO OUT | L | Y | Cr |
| VIDEO OUT | |
OPTICAL COAXIAL |
|
|
|
| ||
|
|
|
|
|
| |
|
|
|
|
| I | P |
DIGITAL AUDIO OUT | R | VIDEO | Cb | S | SCAN MODE | |
(PCM/BITSTREAM) |
|
| ||||
To AUDIO OUT jacks
To Right (red)
and Left (white)
AUDIO INPUT jacks To VIDEO INPUT jack
To VIDEO OUT jack
[Fig. 1]
FOR TVs WITH S-VIDEO INPUT JACK
Use an
AUDIO OUT | L | Y | Cr |
OPTICAL COAXIAL |
DIGITAL AUDIO OUT
(PCM/BITSTREAM) R VIDEO Cb
To AUDIO OUT jacks
To Right (red)
and Left (white)
AUDIO INPUT jacks
To
To
VIDEO OUT
I P
S SCAN MODE
To
[Fig. 2]
but not both | To VIDEO OUT jack |
|
To VIDEO |
|
|
|
|
INPUT jack | AUDIO OUT | L | Y | Cr |
OPTICAL COAXIAL |
|
|
|
To
VIDEO OUT
|
| I P |
|
DIGITAL AUDIO OUT | S | SCAN MODE |
|
(PCM/BITSTREAM) R VIDEO Cb |
|
| |
Stereo system |
|
|
|
To Right (red) and Left (white) |
| ||
AUDIO OUT jacks |
|
| |
To ANALOG AUDIO INPUT jacks | [Fig. 3] | ||
Notes
¡Connect the DVD player directly to a TV. If the A/V cables are connected to a VCR, pictures may be distorted due to the copy protection system.
¡Be sure to turn off the power to all components in the system before connecting another component. ¡Refer to the Owner's Manuals for your TV, stereo system and any other components to be connected to the DVD player. ¡The analog output terminal does not supply DTS sound.
Selecting Progressive Scan (480p) or Interlaced (480i) Playback
¡If your TV is compatible with progressive scanning (480p), connect the TV to the Component Video Output jacks of the DVD player and set the SCAN MODE switch on the back of the DVD player to “P” (PROGRESSIVE). Next, set your TV to the progressive scan mode.
If your TV is not compatible with progressive scan, keep the SCAN MODE switch to “I” (INTERLACE). ¡Use a commercially available adaptor if the video input jacks of your TV or monitor are the BNC type. ¡When SCAN MODE switch is set to "P" (PROGRESSIVE), DVD player outputs from Component Video
Output Jack (not from VIDEO OUT or
What is Progressive Scanning?
¡Unlike conventional interlace scanning, the progressive scan system provides less flickering and images in higher resolution than that of traditional television signals.
¡When P (PROGRESSIVE) is selected, no video signal will be output from the VIDEO OUT, or
– 11 – | EN |
1L25