1 Basic Setup and Operation
Package Contents | TV Overview |
7
Please take a moment to review the following list of items to ensure that you have received everything.
Remote
Control
Internal IR | POWER | |
Emitters for | 3D |
|
Glasses |
|
|
|
| Indicator Light |
|
| (page 31) |
Two AA
Batteries
|
| Basic | Quick |
AA |
| Owner’s | Setup |
AA |
| Guide | Guide |
Product
Registration
•IR Sensor
•Ambient Light Sensor
Note: Do not block the area in front of the sensors and emitters.
Control Panel. To display the main menu without using the remote control, press
Card
Cable Tie
INPUT and VOL+ simultaneously for about 10 seconds. Press and hold INPUT and VOL+ for 10 seconds to clear the menu.
Installing the Remote Control Batteries
1.Remove the remote control’s back cover by gently pressing in the tab and lifting off the cover.
2.Load the batteries, making sure the polarities
(+) and
Location of internal antennas. Keep this area clear of external wireless transmitters.
Rear Connection Jacks
3.Snap the cover back in place.
1 | The remote |
| control |
requires two AA batteries.
2
Before You Begin
1.Review the important safety, installation, and oper- ating information at the beginning of this book.
2.Choose a location for your TV.
•See the stand requirements on page 1.
•Allow at least four inches of space on all sides of the TV to help prevent overheating. Over- heating may cause premature failure of the TV.
•Avoid locations where light may reflect off the screen.
3.Install the batteries in the remote control.
4.Plug the TV into an AC power outlet.
For assistance call 1(877)