Mitsubishi Electronics CS-35305 manual IIo, IV + audio system

'IV" + audio system

equipment you will need

To hook up an audio system, you will need:

•One set of RCA pin audio cables.

procedure

0 Connect the audio cables to the

AUDIO OUTPUT terminals on the back of the TV. Use the red cable to connect the right (R) channel and the white cable to connect the left (L) channel.

IIo-/

OConnect the other ends of these cables to the AUX IN terminals on the back of the audio system.

O Turn off the television's speakers. To do this, press the AUDIO function button on the remote control until you see the "Speaker" display. Set the speakers to "Of?' by pressing the

ADJUST buttons. See "A_usting the sound," on page 54.

Set the audio system's input to the "ALE_" position.

Audio System Rear Terminals

AUX

--White Lead

---},- L (_)

[_ RedLead O

--}'- R (_

TV Rear Tern-inals

VHF/UHF

(75_)

--White Lead

Red Lead

>:hnportant:	You should	make	this connection		in addition t_	one of the other
	connections	in this	chapter,	not	instead of other	connections.

34 Chapter 2: Connecting Your TV