JVC XV-S40BK, XV-S42SL manual Checking the status, To check the disc/time information

Page 36

Advanced

operations

 

 

Advanced operations

THEATER

You can enjoy sound effects like in a major theater in Hollywood.

￿When you play a DVD VIDEO disc recorded in Dolby Digital which contains more than 3 channels, ACTION does not appear.

NOTES

The 3D Phonic display will automatically disappear if you do not change the 3D PHONIC for 5 seconds.

To turn off the 3D PHONIC display manually, press

ENTER.

With a Video CD disc, if the Audio setting is set to L or R, tou cannot activate the 3D PHONIC function (i.e the 3D PHONIC mode is fixed to OFF).

Conversly, when the 3D PHONIC function is active, changing the AUDIO setting to L or R from STEREO cancels the 3D PHONIC function.

The 3D PHONIC function works correctly when playing back discs recorded in the Dolby Surround or Dolby Digital 5.1-CH format.

It also works when playing back discs other than those above, but does not provide the correct effect.

The 3D PHONIC function does not affect the DTS or Dolby Digital bitstream signal from the DIGITAL OUT jack.

The sound effect will not be set or operate, even if 3D PHONIC is pressed, for the sound of DVD VIDEO discs recorded in Linear PCM.

When you set the 3D PHONIC function to on, the DOWN MIX and COMPRESSION settings in the AUDIO page of the preference display are disabled.

Checking the status

You can view the disc/time information, as well as the DVD functions status on the TV screen.

To check the disc/time information

OPEN

STANDBY/ON

/CLOSE

 

PLAY

3D

MODE

PHONIC CANCEL RETURN

 

1

2

3

 

 

4

5

6

 

 

7

8

9

 

10

0

+10

 

 

 

 

THEATER

 

ANGLE

SUBTITLE AUDIO POSITION

 

DIGEST

 

ZOOM

 

 

US

NEXT

 

PREVIO

 

 

 

4

¢

 

 

CLEAR

SELECT

STROBE

 

3

 

 

7

8

 

 

 

 

 

 

 

SLOW

SLOW+

 

 

 

 

 

 

 

1

¡

 

 

 

LE

 

ME

NU

 

TIT

 

 

 

 

 

5

 

 

 

 

5

ENTER

5

1

 

 

 

 

CH

OICE

 

 

LAY

 

 

DISP

REMOTE CONTROL

7 During playback

1 Press DISPLAY once for a Audio CD, Video CD or SVCD disc, or twice for a DVD VIDEO disc.

The disc/time display appears on the TV screen.

(for DVD VIDEO)

TITLE 1 CHAP. 25 TIME 2:25:25 BITRATE 3.3 Mbps

Transmission

Elapsed time rate

Current chapter number

Current title number

(for Audio CD, Video CD or SVCD playing without PBC)

TRACK 1TIME 00:08 EACH

Time mode

Current track elapsed time

Current track number

(for Video CD/SVCD playing with PBC)

TRACK 1TIME 00:08 PBC

PBC on status

Current track elapsed time

Current track number

To turn off the disc/time display Press DISPLAY.

34

Image 36
Contents 96%.966 Important for Laser Products Table of Contents Features Supplied accessoriesIntroduction These symbols Indicate the typesDiscs which Operation can beSafety precautions Important cautionsPreliminary knowledge Names of parts and controlsFront panel Remote control unit Used as Display window Rear panelOperational Principles On-screen displaysOpening displays Preference displaysPlay mode displays To prevent the monitor from burning out Screen SaverStatus displays How to use numeric buttons On-screen guide iconsAbout invalid operation icon To select a track/title numberAbout discs Playable disc typesDisc structure Playable discsGetting started ConnectionsBefore making any connections To connect to a TVHow to make the Component Video OUT jacks active To connect to a TV with the component video input jacksTo connect to an audio amplifier or receiver To connect to audio equipment with a digital inputRed White Audio cable not supplied Amplifier or receiver Audio cableTo connect the power cord To install batteries in the remote control unit Precautions for the safe use of batteriesPrecaution Basic operations Turning on/off the unitInserting and removing discs Press 0 OPEN/CLOSE to close the disc trayBasic playback To start playbackTo stop playback completely To stop playback temporarilyResuming playback To locate the beginning of the scene or songTo memorize the interrupted position To resume playbackAdvanced operations To locate a desired scene from the DVD menuPress Title or Menu ExampleTo locate a desired selection using 4 or ¢ Use the numeric buttons to specify the numberPress Play Mode Use Cursor 2/3 to move to CHAP. SEARCH, then press EnterUse the numeric buttons 0 to 9 to enter Desired chapter numberWhen you make a mistake To locate a desired scene from the display DigestUse the numeric buttons 0 to 9 to enter the time Press DigestSpecial picture playback Use Cursor 5/∞/2/3 to select the desired scenePress and hold 8 for more than 1 second To playback in slow-motion Slow To zoom a scene ZoomPress Zoom Press 8, then use 1 / ¡Changing the playback order To playback in the desired order ProgramUse Cursor 2/3 to move to Program and press Enter Press 3 to start program playRepeat playback To playback in random order RandomTo repeat the current selection or all tracks Repeat Use Cursor 2/3 to move to RandomMake sure that the Repeat mode is off. If any Repeat Mode is selected, you cannot move To A-BAudio CD/Video CD/SVCD To quit repeat playbackSelecting a scene angle To select a scene angle from the normal screen AnglePress Angle Use Angle or Cursor 2/3 to select the desired angleTo select the subtitle language Subtitle Press and hold Angle for more than 1 secondUse Cursor 5/∞/2/3 to select the desired angle Press Enter To turn the subtitle on and off, pressTo change the audio language or sound Audio Press AudioFor Svcd For Video CD/SVCDProgramsin Checking the status To check the disc/time informationTo turn off the disc/time display Press Display To check the DVD function status Dimning brightness of the display windowPress Display Press Cursor ∞ while holding down AngleBasic operations using the basic control buttons MP3 CD playbackAbout MP3 CD disc Unavailable functionsTrack/Group selection using the numeric buttons How to select a Track or GroupAdvanced functions Program playbackRandom playback To quit program playback Press 7 while stoppedYou can playback Groups on an MP3 CD disc in random order Repeat playback Use Cursor 2/3 to move to REPEAT, then press EnterYou can repeat playback of the current Group or all Groups During playback or while stoppedInitial settings How to set preferencesSelecting preferences LanguageSetting changes as follows To connect the unit’s digital Output to an external deviceEquipped with a digital input This item must be setDisplay System Press Enter while holding down 7 on the remote control unit Enter your 4-digit password using the numeric buttons 0 toLimiting playback by children To set Parental Lock for the first timeTo change the settings Parental Lock Screen display appearsOn the TV screen To temporarily release the Parental lock Parental Lock Use the Cursor 5/∞ to move to YES, then press EnterAV Compu Link remote control system Connection and setupAdditional information To AV Compu Link II or EX DVD playerOperation You connect the component video output to your TVHow to handle discs Maintenance of discsCare and handling of discs Label sideTroubleshooting Symptom Possible case RemedySpecifications Appendix ATable of languages and their abbreviations Appendix BCountry code list for parental lock