JVC S30BK, XV-S45GD manual Turning on/off the unit, Inserting and removing discs

Basic operations

In the following description, the buttons on the remote control unit are mainly used, however, you may use the corresponding buttons on the front panel of the unit if available.

Turning on/off the unit

Press STANDBY/ON on the remote control unit or press on the front panel.

STANDBY

		STANDBY ON
OPEN	STANDBY/ON
/CLOSE	STANDBY/ON
		DOLBY
		D I G I T A L
PLAY	3D
MODE	PHONIC CANCEL RETURN

1 2 3

4 5 6

7 8 9

10 0 +10

DVD/CD PLAYER

OPEN/CLOSE

0			DVD / VIDEO CD / CD
4 SKIP ¢	STOP	PLAY	PAUSE

7 3 8

•You can turn on the unit by pressing the 3 button. In this case, the unit starts playback if the disc is set in the disc tray.

•If no disc is set, “NO DISC” appears on the display window.

•You can turn on the unit by pressing the 0 (OPEN/CLOSE) button on the front panel.

NOTE

•Even if you press the STANDBY/ON or button to turn off the unit, the unit is not disconnected from the AC power source as long as it is connected to the wall outlet. This state is called the standby mode. In this state, the unit consumes a very small amount of power.

Inserting and removing discs

1 Press￿0 (OPEN/CLOSE) to open the disc tray. 2 Place the disc in the tray.

With the label side up

Basic operations

	ER
	D PLAY
0	DV
XV-S3

8

03

¢7

4

•To insert an 8-cm disc, place it in the inner recess.

3 Press 0 (OPEN/CLOSE) to close the disc tray.

• If you press 0 (OPEN/CLOSE) during playback, the unit stops playback and opens the tray.

NOTES

•The unit can playback DVD VIDEO, Audio CD, and Video CD discs only. Do not load other disc types. For details about playable disc types, see page 12.

•When loading a disc in the tray, be sure to position the disc inside the recess. Otherwise, the disc may be damaged when the tray is closed, and the disc may not be removed from the unit.

17