JVC XV-S45GD manual To change the settings Parental Lock, Screen display appears, On the TV screen

Initial settings

To change the settings [PARENTAL LOCK]

You can change the Parental lock settings later.

4 To change the set level, use CURSOR 2/3 to

select the desired level while points [Set Level], and then press ENTER.

moves to [PASSWORD].

5 Enter the password using the numeric buttons (0 to 9) and press ENTER.

2-1, 5-1

1

OPEN	STANDBY/ON
/CLOSE
PLAY	3D
MODE	PHONIC CANCEL RETURN

	1		2	3
	4		5	6
	7		8	9
	10		0	+10
				THEATER
ANGLE			SUBTITLE AUDIO POSITION
DIGEST				ZOOM
		US		NEXT
PREVIO
	4			¢
	CLEAR		SELECT	STROBE
		7	3	8
	SLOW–			SLOW+
		1		¡
	LE			ME	NU
TIT
			5
	5		ENTER	5
			∞
C	HO				Y
		ICE		PLA
				DIS

RM-SXVB40AREMOTE CONTROL

1, 2-2, 3-2,

4-2, 5-2

3-1, 4-1

moves to [EXIT].

The password entered in the above step becomes the new password. If you do not change the password, enter the same password as in the step 2. Even if you want to change only the country code and/or parental level, do not forget to enter the password after changing the country code and/or parental level. Otherwise, the new country code and/or parental level will not become effective. Pressing ENTER again returns to the opening display.

NOTES

•	When you enter the wrong password more than 3 times
	in step 2 above,	moves to [EXIT] automatically and
	CURSOR 5/∞ does not work.
•	If you forget your password in step 2

7While a DVD VIDEO disc is stopped or no disc is inserted

1 Press ENTER while holding down 7 on the remote control unit.

The Parental Lock on-

screen display appears		PARENTAL LOCK
	Country Code		US
on the TV screen.
	Set Level		8
	PASSWORD		- - - -

points [PASSWORD].

EXIT

CURRENT PASSWORD? ••• PRESS 0~9 KEY

2 Enter your current 4-digit password using the

numeric buttons (0 to 9) and press ENTER.

	moves to [Country Code] if you enter the correct
settings
	password.
	If you enter the wrong password, “WRONG!
Initial	RETRY...” appears on the TV screen, and you
	cannot go to next step.

3 To change the country code, use CURSOR 2/3 to select the desired country code and press ENTER.

moves to [Set Level].

When you change the country code, you must select the parental level.

Enter “8888.”

40