JVC MC-8200LU manual Error code list, How to cancel the Error, Device Error Description Part Code

Page 31

Error Codes

10-2. Error code list

Device

Device

Error

Description

part

code

 

 

 

 

01

UP/DOWN rotary sensor does not change

 

 

02

Left slit sensor does not change

 

 

03

Right slit sensor does not change

C

U

04

UP/DOWN motor does not function

 

 

07

UP/DOWN motor drive short-circuits and over-current is detected

 

 

08

UP/DOWN operation exceeds the predetermined duration

 

 

09

Lower limit sensor turn on during UP/DOWN operation

 

 

10

Tray lock release not possible

C

L

11

Tray lock impossible, or lane change not possible

 

 

12

Tray lock does not exist at the initial position during carrier movement

 

 

 

 

 

 

20

Catcher (right → left) movement operation exceeds the predetermined duration

 

 

21

Catcher (left → right) movement operation exceeds the predetermined duration

 

 

22

Catcher (right → left) convergence operation exceeds the predetermined duration

 

 

23

Catcher (left → right) convergence operation exceeds the predetermined duration

 

 

24

Catcher (right → left) tray rotary sensor does not change

 

 

25

Catcher (left → right) tray rotary sensor does not change

C

C

26

Right catcher sensor does not turn on

 

 

27

Left catcher sensor does not turn on

 

 

28

Catcher motor (right → left) does not function

 

 

29

Catcher motor (left → right) does not function

 

 

30

Tray does not exist

 

 

31*2

Magazine insertion incomplete, or sensor defective

 

 

32

Over-current is detected during catcher motor operation

C

D

41

Destination-unknown tray exists on the carrier

42

No disc in the tray

 

 

 

 

43

Flip tray does not exist

 

F

80

During the flip raise operation, the expected time required is over

 

81

During the flip descent operation, the expected time required is over

 

 

 

E

50

Mail Slot ejecting is not possible

M

L

51

Mail Slot loading is not possible

 

T

52

Destination-unknown tray exists in the Mail Slot

 

T

60

Destination-unknown tray exists in the Drive and the control cable of the Drive is disconnected.

 

61

Tray removal is not possible at the drive position

(D#)*1

 

 

C

62

Disc clamp of the drive does not function

 

E

63

Drive ejection is not possible

 

D

64

Failure to remove the disc from the drive

 

S

65

Spindle motor fails to stop (Ejection inhibited status)

 

 

 

 

*1: # represents the drive number.

*2: Check the magazine loading condition. (a See “9-1. Ejecting/loading the magazines” on page E27.)

10-3. How to cancel the Error "64"

Please have your dealer or local JVC-authorized service agent perform this work.

Error “64” occurs when the removal of a disc from a drive fails or when the position of a disc on the tray is unstable.

During the occurrence of Error "64", even if the power is turned ON again, the unit will not startup. Perform the following operation:

1.

Open the door and remove the side and center panels.

3. Close the door, then while pressing the '0' key, turn the

2.

Remove both the disc and the tray from the drive and

power ON.

 

* If the cancellation of the Error "64" is performed without removing

that is on the carrier. Contact JVC for assistance.

the disc and tray from the carrier, damage to either or both of them may result.

ENGLISH

E31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents MC-8200LU MC-8600LU MC-8200LU MC-8600LUInformations pour le Canada Information for CanadaInformation for USA Packaged Items Special FeaturesContents  Installation and handling precautions Precautions Disc handling precautions Front panel, right side panel, rear panel Names and Functions of PartsInterior Magazine No Disc No Magazine numbers, tray numbers, disc numbersMagazine number Tray NoInterior Internal Scsi cableAttaching the casters SetupRemoving the optional carrier transport lock screw Opening the transport lockSee 9-1. Ejecting/loading the magazines on page E27 Removing the transport protective materialsRemoving the optional carrier transport lock screw Installing drives and settings SCSI-ID No., etcConnecting the power cord and cables ID No. Display ID No. SET ModeNormal display Menu display2During initialization Power onWhen the MC-CF10U Optional Carrier is installed Event displayDisplay and operation sequence Door Opening Door OPENING/CLOSINGDisc loading Mail SlotDisc loading/ejection method A Y N o 2 Import/export operationE C K T H E L O C K Drive Units Installing the drive unitsRemoving the panel Connecting the cables Setting the SCSI-ID Numbers, etcMC-R433 rear panel Library SE-LVD conversion board Automatic drive detection mode Installing the panelsMeaning of the display Drive type displayDisplay for checking the Scsi ID numbers Setting the SCSI-ID Numbers of the Main UnitLoading MagazinesEjecting/loading the magazines EjectionLoading/replacing the discs Automatic disc checking function  Switching the operation modes Checking the operation modes Units in error and unit detail codes Error CodesError code explanation LCD displays in the event of errorHow to cancel the Error Error code listDevice Error Description Part Code Troubleshooting Error history displayError history 10. FL Access CountsSpecifications MC-8200LU/MC-8600LU CD/DVD Library
Related manuals
Manual 138 pages 53.49 Kb

MC-8200LU, MC-8600LU specifications

The JVC MC-8600LU and MC-8200LU are two innovative multimedia projectors designed for a range of professional applications, blending high-quality image performance with user-friendly features. These models are highly regarded for their advanced technology and versatility, making them suitable for corporate presentations, educational purposes, and immersive home theater experiences.

The JVC MC-8600LU is equipped with a native 4K resolution, delivering stunning image clarity and detail. It utilizes JVC’s unique e-shift technology which enhances the overall visual experience by upscaling lower resolutions to near 4K quality. This projector boasts a high contrast ratio, allowing for deep blacks and vibrant colors, enhancing the viewing experience significantly.

On the other hand, the MC-8200LU, while not native 4K, offers impressive imaging capabilities with its WUXGA resolution. This projector is tailored for environments that do not necessarily require 4K but still demand high-quality image output. Both models feature JVC's proprietary D-ILA technology, which ensures smooth images with excellent color accuracy, making them ideal for detailed presentations.

In terms of brightness, the MC-8600LU shines with its 8000-lumen brightness rating, proving effective even in brightly lit environments. The MC-8200LU offers a notable 6000 lumens, providing flexibility for various installation scenarios. The projectors ensure consistent performance across diverse settings, from boardrooms to classrooms.

Connectivity options are robust in both models, featuring HDMI, DisplayPort, and HDBaseT inputs, allowing for easy integration with various devices. They are also equipped with network capabilities, enabling remote monitoring and management through a web interface, making them suitable for use in extensive AV systems.

Another noteworthy characteristic of the JVC MC-8600LU and MC-8200LU is their long lamp life, reducing maintenance costs and ensuring longevity in operation, which is a vital aspect for daily users. Additionally, both projectors offer various lens options, allowing for flexible installation arrangements to cater to unique spatial requirements.

In conclusion, the JVC MC-8600LU and MC-8200LU projectors epitomize high performance and adaptability in multimedia presentation solutions. With their advanced technologies, high brightness levels, extensive connectivity, and user-friendly features, they are well-equipped to meet the demands of modern-day audiovisual applications, catering to professionals seeking exceptional image quality and reliability.
Top Page Image Contents