JVC manual Procedure for Installing the MC-R433U CD/DVD Library, MC-R433U insertion direction

Page 4

Procedure for Installing the MC-R433U in

the CD/DVD Library

Sensor slit

MC-R433U

<MC-R433U insertion direction>

MC-R433U

CONNECTION

Connect the MC-R433U to the CD/DVD Library. When necessary, two or more SCSI bus channels may be used by adding the provided SCSI cable.

If the DVD-R is recorded intermittently due to an in- sufficiency in the recording transfer rate on the SCSI bus, the recording quality may deteriorate and play- back malfunctions may occur.

Also refer to the instruction manual for the CD/ DVD Library.

Procedure for Attaching the Provided

SCSI Cable

*If the provided SCSI cable is not used, go to "Procedure for Con- necting the Cables to the Back of the MC-R433U" on the next page.

Provided SCSI cable

Drive locking screw

<MC-R433U locking method>

1. Insert the MC-R433U from the rear of the CD/DVD Library

Be sure not to damage the sensor slit.

Make sure that the direction of the MC-R433U is correct when inserting it.

Be sure that the cables connected to the rear of the CD/ DVD Library are not caught or pinched when inserting the MC-R433U.

2.Insert the MC-R433U slowly until the screw installation hole located on the side of the MC-R433U and the screw instal- lation hole located on the drive locking section are aligned.

3.Screw in the provided drive locking screw to the screw in- stallation hole of the drive locking section.

Tighten the screw firmly.

If the drive locking screw is loose, the drive and/or Li- brary may be damaged.

 

SCSI connector

Blind plate

mounting screw

Connector cap

Drive storage cover

<Provided SCSI cable connection method>

1. In order to remove the two blind plates, remove the four screws from the SCSI connector installation section at the rear of the CD/DVD Library (drive storage cover).

2. Insert the provided SCSI cable through the installation hole from the inside of the drive storage cover and secure it with the four screws.

Remove the connector cap of the SCSI cable for instal- lation.

Be sure that the SCSI connector is inserted in the cor- rect direction. (It should be the same as the direction of the SCSI connector "SCSI-A.")

3.If the cable or the terminator are not being connected to the OUT side of the SCSI connector ("SCSI-D"), place the connector cap over it.

E

Image 4
Contents MC-R433U Installation Flow Precautions Before USEProcedure for Determining the Setup Position for MC-R433U Procedure for Opening the Door CD/DVD LibraryWith the MC-8100U Procedure for Attaching the Provided Scsi Cable Procedure for Installing the MC-R433U CD/DVD LibraryMC-R433U insertion direction Procedure for Connecting the Cables to Back of the MC-R433U Procedure for Setting the DIP SwitchExecution of Auto Matic Drive Detec Tion Mode Procedure for Setting the Slide SwitchProcedure for Closing the CD/DVD Library Door Close the door and lock the key cylinderSpecifications DVD-RAM, CD-R and CD-RW discs using the drives  Applicable discsSame model. If drives of different models Are used in write and read, discs of certain manuMC-R433UBEDIENUNGSANLEITUNG Installationsreihenfolge Sicherheitshinweise VOR DEM GebrauchAnschlüsse EinrichtenSo öffnen Sie die Tür der CD/DVD Bibliothek Bestimmen der Einbaubucht für das MC-R433USo installieren Sie das MC-R433U in der CD/DVD-Bibliothek So schließen Sie das mitgelieferte Scsi Kabel anSo schließen Sie die Kabel an die Rückseite von MC-R433U an Anschlussbeispiel MC-R433URückseite von MC-R433U  Überprüfen Sie die Stecker auf einwandfreien SitzDurchführen DER Automatischen Lauf Werkerfassung So stellen Sie den Schiebeschalter einDie CD/DVD-Bibliothek durch So schließen Sie die Tür der CD/DVD BibliothekTechnische Daten  Schnittstelle SCSI-2  Datentransferrate Durchschn. Zugriffszeit 1/3 Takt  Abmessungen Geeignete Disks Matsushita Electric Corp Änderungen der Konstruktion und der technischen Daten Jederzeit ohne Vorankündigung vorbehaltenMC-R433UMANUEL D’INSTRUCTIONS Installation Precautions Avant L’EMPLOIConfiguration Execution DU Mode DE Detection Automatique DE LecteurAvec le MC-8100U Détermination de l’emplacement du MC-R433USection du magasin des Installation du MC-R433U dans la Bibliothèque CD/DVD Fixation du câble Scsi fourniRaccordement des câbles à l’arrière du MC-R433U Réglage des microcommutateursExample de raccordement du MC-R433U Panneau arrière du MC-R433URéglage du curseur Fermeture de la porte de la bibliothèqueRaccordement de la bibliothèque CD DVD à l’ordinateur hôte Refermez la porte, puis verrouillez la serrure Poids  Accessoires  Interface SCSI-2  Vitesse de transfert Temps d’accès moyen 1/3 segment  Capacité tamponSpecifications suite  Disques applicablesDVD-RAM/R驱动器  !#$%  !#$% `JoQPPr `pf Lrq  !#$%  !# AsaJoj OKTT=jÄóíÉëLë MC-R433U DVD-RAM/R Drive

MC-R433U specifications

The JVC MC-R433U is a versatile and innovative home audio system that combines sleek design with modern technology to deliver an outstanding music experience. This compact stereo system is designed for users who seek high-quality audio output without compromising on space or aesthetics.

One of the main features of the JVC MC-R433U is its powerful sound output, thanks to its dual speaker configuration that enhances clarity and bass. The system is equipped with a built-in amplifier that delivers robust performance, making it suitable for various music genres, from classical to contemporary pop. Additionally, the speakers are designed to provide a balanced sound profile, ensuring that every note is heard clearly and that the overall listening experience is immersive.

The system supports multiple audio sources, accommodating a wide range of listening preferences. It includes a CD player that supports CD-R, CD-RW, and MP3 playback, allowing users to enjoy their favorite albums and playlists effortlessly. Furthermore, the JVC MC-R433U features AM/FM radio capabilities, providing access to a variety of radio stations, as well as an auxiliary input, enabling users to connect external devices like smartphones or tablets easily.

In terms of connectivity, the JVC MC-R433U also offers Bluetooth functionality, allowing for wireless streaming from compatible devices. This feature caters to the growing demand for convenience and flexibility in how music is accessed and enjoyed. Users can play their favorite tracks directly from their smartphones or other Bluetooth-enabled devices without the hassles of detailed wiring.

The design of the JVC MC-R433U is both modern and elegant, with a compact footprint that fits comfortably in most spaces. The intuitive control panel and LCD display ensure that all functions are easy to navigate, while the remote control adds an extra layer of convenience for users who prefer to manage their audio experience from a distance.

Another notable characteristic of the JVC MC-R433U is its energy-efficient performance, adhering to modern sustainability standards while maintaining high audio quality. This dedication to energy efficiency not only contributes to lower electricity bills but also minimizes the system's environmental impact.

In summary, the JVC MC-R433U stands out as a well-rounded home audio system that combines excellent sound quality, versatile connectivity, and user-friendly design. It is a perfect choice for music lovers who want a compact yet powerful audio solution that enhances their listening experience in any setting.