ENGLISH | preference. |
| Adjusting the sound |
| You can adjust the sound characteristics to your |
| 1 |
Ex.: When “FAD” is selected
2
Indication pattern changes as you adjust the level.
Indication | To do: | Range |
FAD*2 | Adjust the front | R06 |
(fader) | and rear speaker | (Rear only) |
| balance. | to |
|
| F06 |
|
| (Front only) |
|
|
|
BAL | Adjust the left | L06 |
(balance) | and right speaker | (Left only) |
| balance. | to |
|
| R06 |
|
| (Right only) |
|
|
|
LOUD | Boost low and | LOUD ON |
(loudness) | high frequencies | J |
| to produce a well- | LOUD OFF |
| balanced sound at |
|
| low volume level. |
|
|
|
|
SUB. W*3 | Adjust the | 00 (min.) |
(subwoofer) | subwoofer output | to |
| level. | 08 (max.) |
|
|
|
VOL. A*4 | Adjust and store | |
(volume | the volume level | to |
adjust) | of each source. | +05 (max.) |
|
|
|
VOL*5 | Adjust the | 00 (min.) |
(volume) | volume. | to |
|
| 30 or 50 |
|
| (max.)*6 |
*2 If you are using a
*3 This takes effect only when a subwoofer is connected.
*4 You cannot make an adjustment if the source is FM. “FIX” will appear.
*5 Normally the control dial works as the volume control. So you do not have to select “VOL” to adjust the volume level.
*6 Depending on the amplifier gain control setting. (See page 36 for details.)
34