JVC XV-S200BK manual To connect to a TV with the component video input jacks

Getting started

To connect to a TV with the component video input jacks

You can enjoy high picture quality by connecting the unit’s COMPONENT VIDEO OUT jacks to the COMPONENT VIDEO IN jacks of your TV with the video cables.

Note that the COMPONENT VIDEO OUT jacks are not active in the initial (factory preset) condition. See below for details how to make them active.

Getting started

		Blue
Green			Red	Component video cable
				(not supplied)
COAXIALPCMDIGITAL/STREAMOUT		COMPONOUTENT
				S-ANDOUT SELECTCOMPONENT
The unit				VIDEO
S-VIDEO	VIDEORIGHTLEFT
	Red		White

Audio cable (not supplied)

White

Red

Blue

Green Red

TV

IN

S-VIDEO	Y PB PR
VIDEO	IN

LEFT

AUDIO

RIGHT

•Connect “Y” to “Y,” “PB” to ”PB,” “PR” to “PR” correctly.

Enabling the COMPONENT VIDEO OUT

For your TV connection, you can use either the component video output or the S-video output at a time.

When you use the component video output, set the VIDEO OUT SELECT (COMPONENT/S-VIDEO) switch on the rear panel to “COMPONENT”. Then, “COMPONENT” appears on the display window for a few seconds.

(Display Window)

VCDVD GROUP TITLE TRACK CHAP 1 A-B

PROGRAM

RANDOM

Note that you must change the switch position while the unit is stopped, or the unit power is off. Otherwise, the changed setting is not effective.

NOTES

•When the component video input jacks of the TV is the BNC type, use an adapter to convert a pin jack to a BNC jack (optional).

•When you use the component signal connection, the screen will become blue if setting is made to S-VIDEO. In this case, switch the setting to COMPONENT.

•If you switch the VIDEO OUT SELECT switch while the unit power is off with a DVD inserted, depending on the DVD being used, the unit may automatically start playback and the video out is not switched as you expected. In this case, press the 7 button. The unit stops and switching is correctly made according to your switch selection.

14