![](/images/new-backgrounds/1127134/12713493x1.webp)
Advanced operations
Adjusting the surround sound
You can select a simulated surround effect depending on the disc contents. If you connect the unit to your stereo system, you can enhance sound quality and produce a greater surround effect.
To simulate a surround sound [3D PHONIC]
7During playback
1 Press 3D PHONIC .
2 Within 10 seconds, select the desired effect mode by pressing 3D PHONIC .
Each time you press , the
3D PHONIC
effect mode changes as follows:
ACTION*
3D PHONIC |
| |
THEATER | L | H |
DRAMA | Selected effect mode |
THEATER
OFF
*When you play a DVD disc recorded in Dolby Digital which contains more than 3 channels, ACTION does not appears.
To turn off the 3D PHONIC screen, press ENTER . The 3D PHONIC screen disappears if there are no operations for more than 10 seconds.
3 Press
to adjust the effect level.
You can adjust the effect level in 5 level.
Toward L: Reduce the effect
Toward H: Enhance the effect
3D PHONIC |
| |
THEATER | L | H |
Effect level
NOTES
¦The sound effect (3D PHONIC) works correctly when playing back discs recorded with Dolby Surround, Dolby Digital
It also works when playing back discs other than those above, but does not provide the corecct effect.
¦The sound effect is not possible, and will not work even if set when the unit outputs a DTS or Dolby Digital or MPEG bitstream signal from the DIGITAL OUT jack.
¦The sound effect will not be set or operate, even if 3D PHONIC is pressed, on the sound of DVD discs recorded in Linear PCM.
¦When you set the 3D PHONIC function to on, the DOWN MIX and COMPRESSION setting in the PREFERENCE 2 display and settings in the SPK.SETTING are disabled.
46