JVC XV-525BK manual To connect to audio equipment with a digital input, To connect the power cord

Page 17

XV-521BK [J] EN LVT0435-001A

Getting started

To connect to audio equipment with a digital input

You can enhance the sound quality by connecting the unit’s DIGITAL OUT to the digital input of an amplifier, DAT or MD by using an optional digital cable (the XV-521BK/523GD/525BK provides both the optical and coaxial jacks while the XV-421BK only provides the coaxial jack). The digital audio signal from a disc is directly transferred. If you connect the unit to a Dolby Digital or DTS decoder or an amplifier with a built-in decoder by using an optional digital cable, you can enjoy high-quality surround sound.

When you make the digital connection, also make the analog connection, because, depending on the disc type, no audio may be reproduced from the DIGITAL OUT.

For XV-521BK/523GD/525BK

When using the DIGITAL OUT (OPTICAL) jack, remove the protection cap. Do not lose the removed cap. When the DIGITAL OUT (OPTICAL) jack is not used, fix the protection cap into the jack.

Optical digital cable (not supplied)

Coaxial digital cable

(not supplied)

The unit

 

 

 

 

 

 

 

 

 

: except XV-421BK

 

 

 

 

 

 

 

 

DIGITAL OUT

 

VIDEO OUT

 

 

PCM/STREAM

 

COMPONENT

 

 

 

 

COAXIAL

Y PB PR

AV COMPU LINK

 

OPTICAL

 

 

 

 

 

 

Digital equipment

 

S-VIDEO

VIDEO

R

L

 

 

IN

IN

AUDIO OUT

 

 

 

 

 

White

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

LEFT

OPTICAL

 

Red

White

Audio cable

 

AUDIO

DIGITAL

 

 

 

 

Red

RIGHT

COAXIAL

 

 

 

 

 

 

 

 

 

 

(not supplied)

 

 

 

 

 

 

 

 

 

Getting

started

 

 

NOTES

•When you connect the unit's DIGITAL OUT to digital audio equipment, before using, make the “DIGITAL AUDIO OUTPUT” setting in the “AUDIO” page of the preference display correctly according to the connected audio equipment. If the “DIGITAL AUDIO OUTPUT” is not set correctly, loud noise may be generated from speakers, causing damage to your speakers. See “DIGITAL AUDIO OUTPUT” on page 36.

•With the digital connection, the unit’s settings for COMPRESSION and DOWN MIX in the AUDIO page of the preference display are invalid. Settings for these items must be made from the decoder.

To connect the power cord

When all the audio/video connections have been made, insert the smaller plug of the supplied AC power cord to the unit’s AC IN connector, then insert the other end to the wall outlet. Make sure that plugs are inserted firmly. The STANDBY indicator lights and setup is completed.

Warning

•Disconnect the power cord if you are not going to use the unit for a long time.

•Disconnect the power cord before cleaning the unit.

•Disconnect the power cord before moving the unit.

•Do not connect or disconnect the power cord with wet hands.

•Do not pull the power cord when disconnecting it, as this may damage the cord and cause fire, electric shock, or other accidents.

Caution

•Do not damage, alter, twist, or pull the power cord, as this may cause fire, electric shock, or other accidents.

•To prevent any accidents or damages caused by an unsuitable AC power cord, only use the supplied power cord. If the cord is damaged, contact a dealer and get the new power cord.

•Do not put anything heavy, or the unit, on the power cord, as this may cause fire, electric shock, or other accidents.

14

Page 16 Page 18
Image 17
Page 16 Page 18
Contents XV-421BK model XV-521BK/XV-523GD/XV-525BK modelsMises en garde, précautions et indications diverses Table of contents Introduction FeaturesSupplied accessories To playback in random order Random Power cord Installation of the unitAvoid high temperatures When you’re awayFront panel Preliminary knowledgeNames of parts and controls 3D Phonic button Remote control unitSubtitle Digest button Audio Strobe buttonSubtitle Digest button 23 Infrared signal-emitting windowAudio Strobe button 24 Numeric buttons 10Rear panel Display windowOn-screen displays Operational PrinciplesOpening displays Preference displaysStatus displays Play mode displaysTo prevent the monitor from burning out Screen Saver On-screen guide icons How to use numeric buttons Playable disc types About discs Disc structure Playable discsConnections Getting startedBefore making any connections To connect to a TVTo connect to an audio amplifier or receiver To connect to a TV with the component video input jacksVideo cable SuppliedTo connect to audio equipment with a digital input To connect the power cordFor XV-521BK/523GD/525BK Except XV-421BKTo install batteries in the remote control unit Using the remote control unitPrecautions for the safe use of batteries PrecautionTo control the volume of a JVC’s amplifier or receiver To use the remote control unit for TV operationSetting the remote control signal for operating your TV Manufacturer code listTurning on/off the unit Basic operationsInserting and removing discs Press OPEN/CLOSE to close the disc trayTo start playback Basic playbackTo stop playback completely To stop playback temporarilyTo locate the beginning of the scene or song To resume playbackTo memorize the interrupted position To resume playbackTo locate a desired scene from the DVD menu Advanced operationsPress Menu or Title Use Cursor 2/3/5/to select a desired item, then press EnterTo locate a desired selection using 4 or ¢ To locate a desired selection using the numeric buttonsUse Cursor 2/3 to move to CHAP. SEARCH, then press Enter Press Play Mode CancelPress Enter Use Cursor 2/3 to move to Time SEARCH, then press EnterPress Subtitle Digest while holding down Shift When you make a mistakeUse Cursor 2/3/5/to select the desired scene For DVD Video For Audio CDTo advance a still picture frame-by-frame Special picture playbackTo display still pictures Strobe Press Audio Strobe while holding downPress Slow To playback in slow-motion SlowPress PAUSE, then use the Shuttle knob Press Pause then use 1/ÁTo zoom a scene Zoom Changing the playback orderTo playback in the desired order Program Press Angle Zoom while holding downUse Cursor 2/3 to move to Random To playback in random order RandomPress Play to start program play Repeat playback To repeat the current selection or all disc contents RepeatTo A-B Repeat To repeat a desired part A-B RepeatUnit locates a and starts repeat playback Between a and B For DVD Video For Audio CDTo select a scene angle from the angle list display Angle Selecting a scene angleTo select a scene angle from the normal screen Angle To change the audio language or sound Audio Changing the language and soundTo turn the subtitle on and off, press Press Audio StrobeEnjoying virtual surround sound Selecting the picture characterTo select the picture character Theater Position To simulate surround sound 3D PhonicTo check the disc/time information Checking the statusPress Display Time while holding down To check the DVD function statusPress Display Time To turn off the disc/time display Press DISPLAY-TIMEHow to set preferences Initial settingsSelecting preferences LanguageAudio Display System AV Compulink Mode except XV-421BKXV-521BK/523GD/525BK XV-421BKTo set Parental Lock for the first time Limiting playback by childrenPoints Country Code, use Cursor 2/3 to select US for countryPress Enter while holding down Shift To temporarily release the Parental lockTo change the country code, use Cursor To change the set level, use Cursor 2/3toAdditional information Connection and setupOperation Care and handling of discsSymptom Possible case Remedy TroubleshootingSpecifications Appendix a Table of languages and their abbreviations Appendix B Country code list for parental lock HOW to Locate Your JVC Service Center Limited Warranty Consumer Video 0400RIMUBNJSC
Top Page Image Contents