When you turn on for the first time
The menu for a language selection will appear when you turn on the unit for the first time. You must select a language to use the unit. Use b / B / v / V to select a language then press ENTER and the confirm menu will appear. Use b / B to select [Enter] then press
ENTER.
Displaying Disc Information on-screen
You can display various information about the disc loaded
1.Press DISPLAY to show various playback information.
The displayed items differ depending on the disc type or playing status.
2.You can select an item by pressing v / V and change or select the setting by pressing b / B.
•Title (Track) – Current title (or track). number/total number of titles (or tracks).
•Chapter – Current chapter number/total number of chapters.
•Time – Elapsed playing time.
•Audio – Selected audio language or channel.
•Subtitle – Selected subtitle.
•Angle – Selected angle/total number of angles.
Note:
If any button is not pressed for a few seconds, the on- screen display disappears.
Initial Settings
By using the Setup menu, you can make various adjustments to items such as picture and sound. You can also set a language for the subtitles and the Setup menu, among other things. For details on each Setup menu item, see pages 13 to 15.
To display and exit the Menu:
Press SETUP to display the menu. A second press of SETUP will take you back to initial screen.
To go to the next level:
Press B on the remote control.
To go back to the previous level:
Press b on the remote control.
General Operation
1.Press SETUP.
The Setup menu appears.
2.Use v / V to select the desired option then press B to move to the second level. The screen shows the current setting for the selected item, as well as alternate setting(s).
3.Use v / V to select the second desired option and then press B to move to the third level.
4.Use v / V to select the desired setting then press ENTER to confirm your selection.
Some items require additional steps.
5.Press SETUP or PLAY (N) to exit the Setup menu.
12